| No. | Part # | Manufacturer | Description | Datasheet |
|---|---|---|---|---|
|
|
|
Analog Devices |
Complete 12-Bit 25 MSPS Monolithic A/D Converter Monolithic 12-Bit, 25 MSPS ADC Low Power Dissipation: 280 mW Single 5 V Supply No Missing Codes Guaranteed Differential Nonlinearity Error: ؎0.4 LSB Complete On-Chip Sample-and-Hold Amplifier and Voltage Reference Signal-to-Noise and Distortion Ratio |
|
|
|
|
ETC |
Current Mode PWM Power Converter |
|
|
|
|
M3TEK |
23V/3A High Efficiency Synchronous Rectified Step-Down DC/DC Converter listed is a high performance trans-conductance error amplifier that provides tight voltage regulation and accuracy under transient conditions. A built-in Under Voltage Lockout (UVLO) circuit is provided to prevent start-up until the input voltage rea |
|
|
|
|
Fiti |
500KHz Synchronous Step-Down DC/DC Converter Low RDS(ON) Integrated Power MOSFET Internal Compensation Function Wide Input Voltage Range: 4.5V to 23V Adjustable Output Voltage Down to 0.765V 4A Output Current Fixed 500kHz Switching Frequency External Programmable Soft-Start or Int |
|
|
|
|
SHOUDING |
High Efficiency 1.2MHz 2A Step Up Converter • Integrated 80mΩ Power MOSFET • 2V to 24V Input Voltage • 1.2MHz Fixed Switching Frequency • Internal 4A Switch Current Limit • Adjustable Output Voltage • Internal Compensation • Up to 28V Output Voltage • Automatic Pulse Frequency Modulation Mode |
|
|
|
|
SUNTO |
2.0A Synchronous Step-Down Converter · High Efficiency: Up to 95% · High Efficiency: Up to 95% · 600KHz Frequency Operation · 2.0A Output Current · No Schottky Diode Required · 3.5V to 18V Input Voltage Range · 0.6V Reference · Slope Compensated Current Mode Control for Excellent Line a |
|
|
|
|
Xlsemi |
0.4A 150KHz 80V Buck DC-to-DC Converter Maximum Input Voltage 100V Output Adjustable from 1.25V to 20V Maximum Duty Cycle 90% Minimum Drop Out 2V Fixed 150KHz Switching Frequency Maximum 0.4A Output Current Recommend output power less than 5W Internal Optimize HV Power Tran |
|
|
|
|
ETC |
Low Standy-Power Quasi-Resonant Primary-Side Converter |
|
|
|
|
Lii Semiconductor |
High Performance AC/DC Switch Buck Converter IC |
|
|
|
|
Green Solution Technology |
High Performance Single Synchronous Buck Converter Wide Input Voltage Range：3V~28V Adjustable 0.8V~20V Output Range Wide output load range: 0 to 8A ±1% Output Voltage Accuracy over Line and Load Constant-on-time control scheme for fast transient and high Efficiency Programmable Operation |
|
|
|
|
CXW |
3.5A 180KHz 36V Buck DC/DC Converter n n n n CX8517 General Description The CX8517 is a 180 KHz fixed frequency PWM buck (step-down) DC/DC converter, capable of driving a 3.5A load with high efficiency, low ripple and excellent line and load regulation. Requiring a minimum number of e |
|
|
|
|
Maxim |
Cold-Junction-Compensated K-Thermocoupleto-Digital Converter ● Direct Digital Conversion of Type -K Thermocouple Output ● Cold-Junction Compensation ● Simple SPI-Compatible Serial Interface ● 12-Bit, 0.25°C Resolution ● Open Thermocouple Detection Ordering Information PART MAX6675ISA TEMP RANGE -20°C to +85 |
|
|
|
|
Emerson |
DC-DC / Intermediate Bus Converter • 48 V input with isolated 12 V output • Ultra-high efficiency, 95.5% 12 V @ 25 A • Unprecedented usable output power levels • High power density (362 W/in3) open-frame technology • Wide operating ambient temperature range • Industry stan |
|
|
|
|
Lii Semiconductor |
High Performance AC/DC Switching BUCK Buck Converter IC |
|
|
|
|
Chipown |
Low Standby-Power Off-Line PWM Converters |
|
|
|
|
Aerosemi |
2A Synchronous Step-Down Converter High Efficiency: Up to 96% 600KHz Frequency Operation 2A Output Current No Schottky Diode Required 4.5V to 16V Input Voltage Range 0.6V Reference Slope Compensated Current Mode Control for Excellent Line and Load Transient Response In |
|
|
|
|
XLSEMI |
Boost / Buck-Boost / Inverting DC/DC Converter n n n n n n n n n n n General Description The XL6009 regulator is a wide input range, current mode, DC/DC converter which is capable of generating either positive or negative output voltages. It can be configured as either a boost, flyback, SEPIC or |
|
|
|
|
DEVELOPER MICROELECTRONICS |
2.5A Monolithic Buck Converter 2.5A continuous output current capability 10V to 40V wide operating input range with input Over Voltage Protection Integrated 40V, 80mΩ high side and 4 |
|
|
|
|
DDC |
2-Channel Synchro / Resolver to Digital Converter • Synthesized Reference Option • 1 Minute Accuracy Available (“S” Option only) • Single +5 V Power Supply • 10-, 12-, 14- or 16-Bit Programmable Resolution • Small 54-Pin Ceramic Package • BIT Output • Velocity Output Replaces Tachometer • High Relia |
|
|
|
|
XLSEMI |
Boost / Buck-Boost / Inverting DC/DC Converter n Wide 5V to 32V Input Voltage Range n Positive or Negative Output Voltage Programming with a Single Feedback Pin n Current Mode Control Provides Excellent Transient Response n 1.25V reference adjustable version n Fixed 400KHz Switching Frequency n M |
|