| No. | Part # | Manufacturer | Description | Datasheet |
|---|---|---|---|---|
|
|
|
Avia semiconductor |
24-Bit Analog-to-Digital Converter • Two selectable differential input channels • On-chip active low noise PGA with selectable gain of 32, 64 and 128 • On-chip power supply regulator for load-cell and ADC analog power supply • On-chip oscillator requiring no external component with op |
|
|
|
|
Titan Micro |
16-bit analog to digital converter anmec.com -3- ©Titan Micro Electronics 16 bit TM7705 14 15 16 DIN VDD GND +2.7V~+5.25V TA = +25 VDD GND GND GND GND GND B -0.3V +7V -0.3V VDD -0.3V VDD -0.3V VDD -0.3V VDD -40 +85 -65 +150 +150 450mW 105 /W +260 450mW 75 /W +215 +220 450mW 139 |
|
|
|
|
Microchip Technology |
12-Bit Digital-to-Analog Converter • 12-Bit Resolution • On-Board Nonvolatile Memory (EEPROM) • ±0.2 LSB DNL (typical) • External A0 Address Pin • Normal or Power-Down Mode • Fast Settling Time: 6 µs (typical) • External Voltage Reference (VDD) • Rail-to-Rail Output • Low Power Consu |
|
|
|
|
Toshiba Semiconductor |
8 BIT 8 CH SERIAL I/O ANALOG TO DIGITAL CONVERTER |
|
|
|
|
Analog Devices |
1.8V Analog-to-Digital Converter PRODUCT HIGHLIGHTS SNR = 79.0 dBFS at 70 MHz and 125 MSPS SFDR = 93 dBc at 70 MHz and 125 MSPS Low power: 373 mW at 125 MSPS 1.8 V analog supply operation 1.8 V CMOS or LVDS output supply Integer 1-to-8 input clock divider IF sampling frequencies t |
|
|
|
|
Rohm |
8-Bit Digital-to-Analog Converter |
|
|
|
|
Fortune Semiconductor |
Analog to Digital Converter …………………………………………… 4 User Development Function………………………… 5 Measurable Modes………………………………… 5 Application Field…………………………………… 5 Block Diagram……………………………………… 6 Pin Diagram………………………………………… 6 Pin Description……………………………………… 7 Dice Pad Layout & Pad Coordinate |
|
|
|
|
Burr-Brown |
DIGITAL-TO-ANALOG CONVERTER • Relative Accuracy (INL): ±0.35LSB • Ultra-Low Glitch Energy: 0.1nV-s • Low Power Operation: 100µA at 2.7V • Power-On Reset to Zero Scale • Power Supply: 2.7V to 5.5V Single Supply • Power-Down: 0.05µA at 2.7V • 12-Bit Linearity and Monotonicity • R |
|
|
|
|
Texas Instruments |
Digital-to-Analog Converter a SLEEP mode, which reduces the standby power to approximately 25 mW, thereby optimizing the power consumption for system needs. The THS5651A is manufactured in Texas Instruments advanced high-speed mixed-signal CMOS process. A current-source-array a |
|
|
|
|
Microchip |
8/10/12-Bit Digital-to-Analog Converters • Memory Options: - Volatile Memory: MCP47CVDXX - Nonvolatile Memory: MCP47CMDXX • Operating Voltage Range: - 2.7V to 5.5V – full specifications - 1.8V to 2.7V – reduced device specifications • Output Voltage Resolutions: - 8-bit: MCP47CXD0X (256 ste |
|
|
|
|
Burr-Brown Corporation |
Dual 18-Bit Monolithic Audio DIGITAL-TO-ANALOG CONVERTER q DUAL 18-BIT LOW-POWER MONOLITHIC AUDIO D/A CONVERTER q VERY LOW MAX THD+N: –92dB Without External Adjust q CO-PHASE, LOW-GLITCH ±3V OR ±670µA AUDIO OUTPUTS q CAPABLE OF 16X PER CHANNEL OVERSAMPLING RATE q COMPLETE WITH INTERNAL REFERENCE q SERIAL I |
|
|
|
|
Beijing Microelectronics |
16-Bit 1GSPS Digital-to-Analog Converter ..................................................................................................................1 2. Applications ............................................................................................................1 3. Gener |
|
|
|
|
Intersil |
Monolithic Digital-to-Analog Converter • Electrically Screened to SMD # 5962-96755 • QML Qualified per MIL-PRF-38535 Requirements • Total Dose . . . . . . . . . . . . . . . . . . . . . . . . . . 100 krad (Si) (Max) • DAC and Reference on a Single Chip • Pin Compatible with AD-565A and HI- |
|
|
|
|
Texas Instruments |
Digital-to-Analog Converters •1 Resolution: 16-Bit • Maximum Sample Rate: – DAC37J82: 1.6 GSPS – DAC38J82: 2.5 GSPS • Maximum Input Data Rate: 1.23GSPS • JESD204B Interface – 8 JESD204B Serial Input Lanes – 12.5 Gbps Maximum Bit Rate per Lane – Subclass 1 Multi-DAC synchronizati |
|
|
|
|
Texas Instruments |
Analog-to-Digital Converters gy. These 4 1/2-digit, dual-slope-integrating, analog-to-digital converters (ADCs) are designed to provide interfaces to both a microprocessor and a visual display. The digit-drive outputs D1 through D4 and multiplexed binary-coded-decimal outputs B1 |
|
|
|
|
Texas Instruments |
8-BIT ANALOG-TO-DIGITAL CONVERTER dily available from the factory. The TLC0834 (4-channel) and TLC0838 (8-channel) multiplexer is software-configured for single-ended or differential inputs as well as pseudodifferential input assignments. The differential analog voltage input allows |
|
|
|
|
Texas Instruments |
DIGITAL-TO-ANALOG CONVERTER • 16-Bit Monotonic • ±5-V Rail-to-Rail Output • Fast Settling: 0.65 µs • Fast Slew Rate: 35 V/µs • Low Noise: 20 nV/√Hz • Low Glitch Energy: 0.5 nV-s • Low Power-On Transient • On-Chip Digital Low-Pass Filter • Programmable Oversampling • 16-MSPS Upd |
|
|
|
|
Burr-Brown Corporation |
10-Bit/ 20MHz Sampling ANALOG-TO-DIGITAL CONVERTER q NO MISSING CODES q INTERNAL REFERENCE q LOW DIFFERENTIAL LINEARITY ERROR: 0.2LSB q LOW POWER: 195mW q HIGH SNR: 60dB q WIDEBAND TRACK/HOLD: 65MHz q PACKAGES: 28-Pin SOIC and 28-PIN SSOP DESCRIPTION The ADS820 is a low power, monolithic 10-bit, 20M |
|
|
|
|
Beijing Microelectronics |
12-Bit 1GSPS Analog-to-Digital Converter ...................................................................................................................1 2. Description..............................................................................................................1 3. Bloc |
|
|
|
|
Burr-Brown Corporation |
Monolithic 16-Bit Resolution DIGITAL-TO-ANALOG CONVERTER q COMPLETE D/A CONVERTER: Internal Voltage Reference ±3V Output Operational Amplifier Pinout Allows IOUT (±1.0mA) Option No external components required q 0.012% LINEARITY ERROR MAX q 12-BIT MONOTONICITY GUARANTEED OVER 0°C TO +70°C q ±5V TO ±12V POW |
|