No. | Part # | Manufacturer | Description | Datasheet |
---|---|---|---|---|
|
|
INCOME |
Audio Power Amplifier a low-power consumption shutdown mode.the 8002 contains advanced pop & click circuitry which eliminates noise which would otherwise occur during turn-on and turn-off transitions. The 8002 is unity-gain stable and can be configured by external gain-se |
|
|
|
Texas Instruments |
Filter-Free Class-D Stereo Amplifier •1 Supports Multiple Output Configurations – 2 × 50 W Into a 4-Ω BTL Load at 21 V (TPA3116D2) – 2 × 30 W Into a 8-Ω BTL Load at 24 V (TPA3118D2) – 2 × 15 W Into a 8-Ω BTL Load at 15 V (TPA3130D2) • Wide Voltage Range: 4.5 V to 26 V • Efficient Class- |
|
|
|
Texas Instruments |
Filter-Free Class-D Stereo Amplifier •1 Supports Multiple Output Configurations – 2 × 50 W Into a 4-Ω BTL Load at 21 V (TPA3116D2) – 2 × 30 W Into a 8-Ω BTL Load at 24 V (TPA3118D2) – 2 × 15 W Into a 8-Ω BTL Load at 15 V (TPA3130D2) • Wide Voltage Range: 4.5 V to 26 V • Efficient Class- |
|
|
|
WELLKING TECHNOLOGIES |
4.8W single channel Class-F audio power amplifier 89509090 MIX2018 4.8W F (ESOP8) WELLKING TECHNOLOGIES CO.,LTD 4/4 TEL:0755-83611411 FAX:0755-89509090 |
|
|
|
ESMT |
2 x 20W Stereo Class-D Audio Amplifier Single supply voltage 4.5V ~ 26V for loudspeaker driver Built-in LDO output 5V for others Loudspeaker power from 24V supply BTL Mode: 20W/CH into 8Ω @<10% THD+N PBTL Mode: 40W/CH into 4Ω @<10% THD+N Loudspeaker power from 12V supply BTL Mode: 9W/CH i |
|
|
|
ETC |
2.0 Watt Audio Power Amplifier Improved PSRR at 217 Hz & 1 KHz 60 dB Power output at 5.0V, 10% THD+N, 4Ω 2.0 W (typ.) Power output at 5.0V, 1% THD+N, 8Ω 1.5 W (typ.) 2.2V – 5.5V operation Improved circuitry eliminates pop-click noise during turn-on and turn-off transitions |
|
|
|
HEROIC |
5.5W Anti-Clipping Mono Class D Audio Amplifier ・Anti-Clipping Function (ACF) ・Filter-less Modulation, Eliminating Output Filter ・Output Power 5.5W (VBAT=4.2V, PVDD = 6.5V, RL=4Ω, THD+N=10%) 3.0W (VBAT=4.2V, PVDD = 6.5V, RL=8Ω, THD+N=10%) ・Power Supply -Boost Input VBAT:2.5V to 5.5V -Boost Output |
|
|
|
LTKCHIP TECHNOLOGY |
AB / Class D audio amplifier I , 5 VON O 6 VDD IO 7 GND IO 8 VOP O (TA=25℃) Vcc 6.0 V Tstg -65℃-150℃ ℃ -0.3 to +(0.3+ Vcc) V PD 1 W 160℃ ℃ 1::TJMAX,TA,θ JA,PDMAX=(TJMAX-TA)/θ JA,LTK5128TJMA=150℃。 TA,θ JA。 、CLASS D 1) MODE=VDD |
|
|
|
LTKCHIP TECHNOLOGY |
Dual Channel Class D Audio Amplifier |
|
|
|
Mixinno |
9.0W built-in boosted mono anti-breaking sound class-F audio amplifier TSTG TSLD ENB ENA, MODE -0.3V to 7V -0.3V to 7.5V -0.3V to AVDD+0.3V -0.3V to PVDD+0.3V -40°C to 85°C -40°C to 125°C -65°C to 150°C 300°C, 5sec AVDD PVDD VIH VIL RL ENB ENA,MODE ENB ENA,MODE (@1KHz) AVDD PVDD AVDD=3.6V PVDD=7.2V |
|
|
|
JRC |
Low Noise Dual Operational Amplifier ● Operating Voltage ● Small Signal Bandwidth ● Output Drive Capability ● Input Noise Voltage ● Power Bandwidth ● Slew Rate ● Package Outline ● Bipolar Technology ■ PIN CONFIGURATION PIN FUNCTION 1.A OUTPUT 2.A –INPUT 3.A +INPUT 4.V 5.B +INPUT 6.B –IN |
|
|
|
Mixinno |
5W Calss-F Amplifier ec VDD SD VIH MODE SD VIL MODE MIN MAX UNIT VDD 2.5 5.0 V VDD=5.0V 2 2 V VDD=5.0V 0.4 0.4 Parameter (Junction to Ambient) (Junction to Case) Symbol θJA θJC Package ESOP8 ESOP8 MAX 90 11 UNIT °C/W °C/W Shanghai Mixinno Mic |
|
|
|
ETC |
Operational Amplifier of modern analog electronics. The op-amp is constructed from several transistor stages, which commonly include a differentialinput stage, an intermediate-gain stage and a push-pull output stage. The differential amplifier consists of a matched pair of b |
|
|
|
ESMT |
2 x 20W Stereo / 1 x 40W Mono Class-D Audio Amplifier Single supply voltage 4.5 ~ 26V for loudspeaker driver Input digital audio interface Sampling frequency: 32kHz, 44.1kHz and 48kHz Left-justified, MSB first, 1-bit delay with digital audio data 24-bits Loudspeaker power @ 24V supply 15W / CH with 8Ω < |
|
|
|
Wuxi Youda electronics |
18W CAR RADIO POWER AMPLIFIER *Requires very few external components for Bridge Tied Load (BTL),Stereo or BTL application; *High output power, Fixed gain, Good ripple rejection; * Identical inputs (inverting and non-inverting),Low offset voltage at output (important for BTL); *Mu |
|
|
|
LTKCHIP TECHNOLOGY |
Class-AB Audio Amplifier SRR 5 VDD=5V,IO=0A 5.5 7.5 9.5 VDD=2V 5.5V THD+N=10%, f=1kHz ,RL=4Ω; THD+N=10%, f=1kHz,RL=3Ω; THD+N=10%, f=1kHz,RL=8Ω; THD+N=1%, f=1kHz ,RL=4Ω; THD+N=1%, f=1kHz ,RL=3Ω; THD+N=1%, f=1kHz ,RL=8Ω; VDD=5V Po=0.6W, RL=8Ω VDD=5V Po=1.6W, RL=4Ω V |
|
|
|
Mixinno |
13W Mono Class-F Audio Amplifier |
|
|
|
Diodes |
LOW POWER DUAL OPERATIONAL AMPLIFIER • Internally frequency compensated for unity gain • Large dc voltage gain: 100 dB • Very low supply current drain (500μA); essentially independent of supply voltage • Wide bandwidth (unity gain): 1MHz (temperature compensated) • Input common-mode vol |
|
|
|
ETC |
AF Power Amplifier |
|
|
|
Hangzhou Silan |
Low Frequency Power Amplifier *Wide operating supply voltage: Vcc=5~12V *Low quiescent supply current (Icc=21mA,typical,at Vcc=9V ,Vi=0) *Output power Po=2.50W/CH at Vcc=9V,RL=4ohm ,f=1kHz,Thd=10% *Soft Clip *Built-in Thermal shut-down protection circuit *Stand-by Switch HDIP-12 |
|