ALUMINUM ELECTROLYTIC CAPACITORS
Description
ALUMINUM ELECTROLYTIC CAPACITORS
GL Snap-in Terminal Type, 105°C Ultra-Smaller-Sized series
One rank smaller case sized than GG series.
Suited for equipment down sizing.
Compliant to the RoHS directive (2002/95/EC).
GG
Smaller
GL
Specifications
Item
Performance Characteristics
Category Temperature Range
– 25 to +105°C
Rated Voltage Range
400 450V
Rated Capacitance Range
120 to 1000µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.
)
400 0.
15
450 0.
20
Measurement frequency : 120Hz, Temperature : 20°C
Stability at Low Temperature
Rated voltage (V)
Impedance ratio ZT/Z20 (MAX.
)
Z – 25°C/ Z+20°C
400 450 8
Measurement frequency : 120Hz Temperature : 20°C
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.
C.
bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.
1 at 20°C, they shall meet the characteristic requirements listed at right.
Printed with white color letter on black sleeve.
Capacitance change tan δ Leakage current
Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Capacitance change tan δ Leakage current
Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
φ D+1.
5MAX.
4.
0± 0.
5 2.
5
Drawing
Polarity bar Sleeve (P.
E.
T.
)
L± 2 Pressure relief vent
4.
0± 0.
5
10 ± 0.
1
10
0.
8
+0.
2 -0.
1
0.
8+-00.
.
21
Type numbering system (Example : 400V 150µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
LGL 2G 1 5 1 MEL Z 25
Configuratio...
Similar Datasheet
