ALUMINUM ELECTROLYTIC CAPACITORS
Description
ALUMINUM ELECTROLYTIC CAPACITORS
GR Snap-in Terminal Type, 105°C Long Life Assurance series
Long life assurance series withstanding 10000 hours application of ripple current at 105°C.
Compliant of the RoHS directive (2002/95/EC).
GR
Long Life GY
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Performance Characteristics
– 40 to +105°C (200 250V) , – 25 to +105°C (400 450V)
200 to 450V
39 to 1500µF
± 20% at 120Hz, 20°C
I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage(V)
200 to 400
450
tan δ (MAX.
)
0.
15
0.
20
Rated voltage (V)
Impedance ratio ZT/Z20 (MAX.
)
Z– 25°C/ Z+20°C Z– 40°C/ Z+20°C
Measurement frequency : 120Hz
200 250
400 450
38 12 —
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.
C.
bias plus rated ripple current is applied for 10000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ± 25% of the initial capacitance value 250% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.
1 at 20°C, they shall meet the requirements listed at right.
Capacitance change tan δ Leakage current
Within ±15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value
Marking
Printed with white color letter on black sleeve.
φD +1.
5 MAX.
4.
0±0.
5 2.
5
Drawing
Polarity bar Sleeve (P.
E.
T.
)
L±2 Pressure relief vent
10 ±0.
1
4.
0±0.
5
10
0.
8
+0.
2 -0.
1
0.
8 +-00.
.
21
Type numbering system (Example : 400V 120µF)
1 2 3 4 5 ...
Similar Datasheet
