ALUMINUM ELECTROLYTIC CAPACITORS
Description
ALUMINUM ELECTROLYTIC CAPACITORS
GN Snap-in Terminal Type, 105°C Smaller-Sized series
Withstanding 3000 hours application of rated ripple current at 105°C.
One rank smaller case sized than GU series.
Addition of 500V rated voltage.
Compliant to the RoHS directive (2002/95/EC).
GU
Smaller
GN
Smaller
Specifications
GG
Item
Performance Characteristics
Category Temperature Range
– 40 to +105°C (160 to 250V) , – 25 to +105°C (350 to 500V)
Rated Voltage Range
160 to 500V
Rated Capacitance Range
56 to 3300µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
I 3 CV(µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.
)
160 to 420 0.
15
450 to 500 0.
20
Measurement frequency : 120Hz, Temperature : 20°C
Stability at Low Temperature
Rated voltage (V)
Impedance ratio ZT/Z20 (MAX.
)
Z – 25°C/ Z+20°C
160 to 250 4
350 to 500 8
Measurement frequency : 120Hz Temperature : 20°C
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.
C.
bias plus rated ripple current is applied for 3000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 105°C for 1000hours and then performing voltage treatment based on JIS C 5101-4 clause 4.
1 at 20°C, they shall meet the characteristic requirements listed at right.
Printed with white color letter on black sleeve.
Capacitance change tan δ Leakage current
Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Drawing
Polarity bar Sleeve (P.
E.
T.
)
L± 2 Pressure relief vent
4.
0± 0.
5
10 ± 0.
1
10
0.
8
+0.
2 -0.
1
0...
Similar Datasheet