Aluminum Electrolytic Capacitor
Description
Aluminum Electrolytic Capacitor/FK
Surface Mount Type
Series: FK Type : V
Country of Origin
n Features Endurance: 2000 to 5000h at105°C
Low impedance (40 to 60% less than FCseries)
Japan
Miniaturization(30 to 50% less than FC series)
Vibration-proof RoHS directive
pcroomdpulciat nist(aPvaaritlsabNleo:uEpEoVn∗rφe1q2u.
e5st=<.
,(Eφ8EE<=∗))
n Specifications
Category temp.
range Rated W.
V.
Range
-55 to +105°C 6.
3 to 100V .
DC
Nominal Cap.
Range Capacitance Tolerance DC Leakage Current tan δ Characteristics at Low Temperature
Endurance
Shelf Life
Resistance to Soldering Heat
3.
3 to 6800 µ F
±20 % (120Hz/+20°C)
I <= 0.
01CV or 3(µA) After 2 minutes application of rated working voltage at +20°C.
(Whichever is greater) Please see the attached standard products list
W.
V.
(V)
6.
3 10 16 25 35 50 63 80 100
Z(-25°C) / Z(+20°C) 2 2 2 2 2 2 2 2 2
(Impedance ratio
Z(-40 °C)/ Z(+20 °C) 3 3 3 3 3 3 3 3 3
at 120 Hz)
Z(-55°C)/ Z(+20 °C) 4 4 4 3 3 3 3 3 3
After the life with ìGî india.
8 to 10
DC rated working are 5000hours)the
vcoaltpaagceitoarts+s1h0a5l±l m2°eCetfotrhe20li0m0ithsosupresc(if=>ieddiab.
1e2lo.
5w.
and
suffix
post-test requirement at +20°C.
Capacitance change ±30% of initial measured value (Suffix “G” is 35%)
tan δ
<= 200 % of initial specified value (Suffix “G” is 300%)
DC leakage current <= initial specified value
After storage for 1000hours at +105±2 °C with no voltage applied and then being stabilized at +20°C, capacitors shall meet the limits specified in Endurance.
(With voltage treatment)
After reflow soldering ( Refer to page 184 for recommendable temperature profile.
) and then being stabilized at +20°C, capacitor shall meet the following limits.
Capacitance change ±10% of initial measured value
tan δ
<= initial specified value
DC leakage current <=initial specified value
n Marking
Example.
16V10µF Marking color : BLACK
W.
V.
code
n Dimensions in mm (not to scale)
0.
3 max
A ± 0.
2
( ) reference size
(P) (I)
B± 0.
2
φD±0.
5
Negative ...
Similar Datasheet
