DatasheetsPDF.com

MAX15500

Maxim Integrated Products

(MAX15500 / MAX15501) Industrial Analog Current/Voltage Output Conditioners


MAX15500
MAX15500

PDF File MAX15500 PDF File


Description
www.
DataSheet4U.
com 19-4602; Rev 0; 6/09 Industrial Analog Current/ Voltage-Output Conditioners General Description The MAX15500/MAX15501 analog output conditioners provide a programmable current up to Q24mA, or a voltage up to Q12V proportional to a control voltage signal.
The control voltage is typically supplied by an external DAC with an output voltage range of 0 to 4.
096V for the MAX15500 and 0 to 2.
5V for the MAX15501.
The output current and voltage are selectable as either unipolar or bipolar.
In the unipolar configuration, a control voltage of 5% full-scale (FS) produces a nominal output of 0A or 0V to achieve underrange capability.
A control voltage of 100%FS produces one of two programmable levels (105%FS or 120%FS) to achieve overrange capability.
The outputs of the MAX15500/MAX15501 are protected against overcurrent conditions and a short to ground or supply voltages up to Q35V.
The devices also monitor for overtemperature and supply brownout conditions.
The supply brownout threshold is programmable.
The MAX15500/MAX15501 are programmed through an SPIK interface capable of daisy-chained operation.
The MAX15500/MAX15501 provide extensive error reporting through the SPI interface and an additional open-drain interrupt output.
The devices include an analog output to monitor load conditions.
The MAX15500/MAX15501 operate over the -40NC to +105NC temperature range.
The devices are available in a 32-pin, 5mm x 5mm TQFN package.
S Supply Voltage Up to Q32.
5V S Output Protected Up to Q35V S Programmable Output (Plus Overrange) Features MAX15500/MAX15501 ±10V 0 to 10V 0 to 5V ±20mA 0 to 20mA 4 to 20mA S Current Output Drives 0 to 1kI S Voltage Output Drives Loads Down to 1kI S HART Compliant S 2ppm Gain Error Drift Over Temperature S SPI Interface, with Daisy-Chain Capability S Supports +4.
096V (MAX15500) or +2.
5V (MAX15501) Full-Scale Input Signals S Extensive Error Reporting Short-Circuit and Overcurrent Protection Open-Cir...



Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)