DatasheetsPDF.com

TA8210AHQ

Toshiba Semiconductor

20W BTL X 2ch Audio Power Amplifier


TA8210AHQ
TA8210AHQ

PDF File TA8210AHQ PDF File


Description
www.
DataSheet4U.
com TA8210AHQ/ALQ TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA8210AHQ,TA8210ALQ 20W BTL × 2ch Audio Power Amplifier TA8210AHQ The thermal resistance θj−T of TA8210AHQ, TA8210ALQ package designed for low thermal resistance, has a high efficiency of heat radiation.
The temperature rise of chip can be reduced, and the influence from the degradation of the features due to the temperature rise at the high output can also be reduced.
This stereo audio power IC, designed for car audio use, has two built−in channels to reduce the characteristic difference between L and R channels.
In addition, the functions of stand−by and muting, and a variety of protection circuits are involved.
TA8210ALQ Features • • Low thermal resistance : θj−T = 1.
5°C / W (infinite heat sink) High power : POUT (1) = 22W (typ.
) / channel (VCC = 14.
4V, f = 1kHz, THD = 10%, RL = 4Ω) POUT (2) = 19W (typ.
) / channel (VCC = 13.
2V, f = 1kHz, THD = 10%, RL = 4Ω) • • • • • • Low distortion ratio: THD = 0.
04% (typ.
) (VCC = 13.
2V, f = 1kHz, POUT = 1W, RL = 4Ω, GV = 50dB) Low noise: VNO = 0.
30mVrms (typ.
) (VCC = 13.
2V, RL = 4Ω, GV 50dB, Rg = 0Ω, BW = 20Hz~20kHz) Built−in stand−by function (with pin(4) set at low, power is turned off.
): ISB = 1µA (typ.
) Built−in muting function (with pin(1) set at low, power is turned off.
): V (mute) = 1V (typ.
) Built−in various protection circuits Protection circuits: Thermal shut down, Over voltage, Out→VCC short, Out→GND short and Out−Out short.
Operating supply voltage: VCC = 9~18V Weight HZIP17-P-2.
00: 9.
8g (typ.
) HSIP17-P-2.
00: 9.
8g (typ.
) 1 2006-04-28 www.
DataSheet4U.
com TA8210AHQ/ALQ Block Diagram TA8210AHQ, TA8210ALQ (GV = 50dB) Cautions And Application Method 1.
Voltage gain adjustment (description is made only on the single channel.
) This IC has the amplifier construction as shown in Fig.
1.
The pre−amp (amp 1) is provided to the primary stage, and the input voltage is amplified by the flat amps, amp 3 and amp 4 of each cha...



Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)