PHASE CONTROL THYRISTORS
Description
www.
DataSheet4U.
com
Bulletin I25195 rev.
B 02/00
ST1280C.
.
K SERIES
PHASE CONTROL THYRISTORS Hockey Puk Version
Features
Center amplifying gate Metal case with ceramic insulator International standard case A-24 (K-PUK) High profile hockey-puk
2310A
Typical Applications
DC motor controls Controlled DC power supplies AC controllers
case style A-24 (K-PUK)
Major Ratings and Characteristics
Parameters
IT(AV) @ Ths IT(RMS) @ Ths ITSM @ 50Hz @ 60Hz It
2
ST1280C.
.
K
2310 55 4150 25 42500 44500 9027 8240 400 to 600
Units
A °C A °C A A KA2s KA2s V µs °C
@ 50Hz @ 60Hz
VDRM /VRRM tq TJ typical
200 - 40 to 125
www.
irf.
com
1
ST1280C.
.
K Series
Bulletin I25195 rev.
B 02/00
ELECTRICAL SPECIFICATIONS Voltage Ratings
Voltage Type number Code
04 06
V DRM/V RRM, max.
repetitive peak and off-state voltage V
400 600
VRSM , maximum nonrepetitive peak voltage V
500 700
I DRM/I RRM max.
@ TJ = TJ max
mA
100
ST1280C.
.
K
On-state Conduction
Parameter
IT(AV) Max.
average on-state current @ Heatsink temperature IT(RMS) Max.
RMS on-state current ITSM Max.
peak, one-cycle non-repetitive surge current
ST1280C.
.
K
2310 (885) 55 (85) 4150 42500 44500 35700 37400
Units Conditions
A °C 180° conduction, half sine wave double side (single side) cooled @ 25°C heatsink temperature double side cooled t = 10ms A t = 8.
3ms t = 10ms t = 8.
3ms t = 10ms KA2s t = 8.
3ms t = 10ms t = 8.
3ms KA2√ s No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial TJ = TJ max.
I 2t
Maximum I2t for fusing
9027 8241 6383 5828
I 2√ t
Maximum I2√ t for fusing
90270 0.
83
t = 0.
1 to 10ms, no voltage reapplied (16.
7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max.
V T(TO)1 Low level value of threshold voltage V T(TO)2 High level value of threshold voltage r t1 r t2 V TM IH IL Low level value of on-state slope resistance High level value of on-state slope resistance Max.
on-state voltage Maximum holding current Typical latching current
V 0.
90 (I > π x IT...
Similar Datasheet
