(SI3014/24.38) Global MC97 Silicon DAA - Silicon Laboratories
Description
Si3038
G L O B A L M C ’ 9 7 S I L I C O N DAA
Features
Complete DAA includes:
AC’97 2.
1 Compliant Primary or Secondary Codec Global Phone Line Interface Compliant with FCC, CTR21, JATE, and Other PTTs 84 dB Dynamic Range TX/RX Paths 3.
3 V or 5 V Power Supply Greater than 3000 V Isolation
Integrated Ring Detector Wake-Up On Ring Caller ID Support Integrated Analog Front End 2- to 4-Wire Hybrid Low-Power Standby Mode Low Profile SOIC Packages Patented ISOcap™ Technology
Ordering Information: See page 59.
Applications
Software Modems Audio/Telephony Sub-Systems
Pin Assignments Audio/Modem Riser Cards (AMR) Mobile Daughter Cards (MDC) Mini-PCI Cards
Si3024 (SOIC)
MCLK/XIN XOUT BIT_CLK VD SDA TA _IN SDA TA _OUT SY NC RESET 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 GPIO_A GPIO_B ID1 VA GND C1A ID0 A OUT
Description
The Si3038 is an integrated direct access arrangement (DAA) chipset that provides a digital, programmable line interface to meet global telephone line requirements.
Available in two 16-pin small outline packages (AC’97 interface on Si3024 and phone-line interface on Si3014), the chipset eliminates the need for an analog front end (AFE), an isolation transformer, relays, opto-isolators, and a 2- to 4-wire hybrid.
The Si3038 dramatically reduces the number of discrete components and cost required to achieve compliance with global regulatory requirements.
The Si3024 complies with the AC’97 2.
1 specification.
Si3024 (TSSOP)
SDA TA _IN SDA TA _OUT SY NC RESET A OUT ID0 C1A GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VD BIT_CLK XOUT MCLK/XIN GPIO_A GPIO_B ID1 VA
Functional Block Diagram
Si3024
XOUT MCLK/XIN RESET BIT_CLK SYNC SDATA_IN SDATA_OUT AC'97 Digital Interface Clock Hybrid and DC Termination
Si3014
Si3014 (SOIC or TSSOP)
RX
QE2
FILT FILT2 REF DCT VREG VREG2 REXT REXT2 RNG1 RNG2 QB QE QE2
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9
FILT2 FILT RX REXT REXT2 REF V REG2 V REG
DCT IGND C1B RNG1 RNG2 QB QE
Isolation...
Similar Datasheet