Transient Voltage Suppression Diodes
Description
15KPA Series
TVS Diode
Axial Leaded – 15000W > 15KPA series
RoHS
Pb e3
Uni-directional
Descriptions
The 15KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Bi-directional
Agency Approvals
Agency
Agency File Number E230531
Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.
2)(Note 1)
Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC
Peak Forward Surge Current, 8.
3ms Single Half Sine Wave Unidirectional Only (Note 2)
Operating Junction and Storage Temperature Range
Typical Thermal Resistance Junction to Lead
Typical Thermal Resistance Junction to Ambient
PPPM
15
PD
8.
0
IFSM
400
TJ, TSTG -55 to 175
RƟJL
8.
0
RƟJA
40
kW W A °C °C/W °C/W
Notes: 1.
Non-repetitive current pulse , per Fig.
4 and derated above TJ (initial) =25OC per Fig.
3.
2.
Measured on 8.
3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum.
Functional Diagram
Features
• Glass passivated chip junction in P600 package
• 15kW peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.
01%
• Fast response time: typically less than 1.
0ps from 0 Volts to BV min
• Excellent clamping capability
• Typical failure mode is short from over-specified voltage or current
• Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
• IEC 61000-4-2 ESD 30kV(Air), 30kV (Contact)
• ESD protection of data lines in accordance with IEC 61000-4-2
• EFT protection of data lines in accordance with IEC 61000-4-4
• Low incremental surge resistance
• Typical IR less than 2μA when VBR min>36V
• High temperature to reflow soldering guaranteed: 260°C/40sec / 0.
375”, (9.
5mm) lead length, 5 lbs.
, (2.
3kg) tension
• VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.
1%)
• U...
Similar Datasheet
