Two-Wire Serial EEPROM
24C02/24C04
Preliminary datasheet
Features
Low-voltage and Standard-voltage Operation – 1.8 (VCC = 1.8V to 5.5V) Op...
Description
24C02/24C04
Preliminary datasheet
Features
Low-voltage and Standard-voltage Operation – 1.8 (VCC = 1.8V to 5.5V) Operating Ambient Temperature: -40°C to
+85°C Internally Organized 256 X 8 (2K), 512 X 8
(4K) Two-wire Serial Interface Schmitt Trigger, Filtered Inputs for Noise
Suppression Bidirectional Data Transfer Protocol 1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V)
Two-Wire Serial EEPROM 2K (256 X 8)/4K (512 X 8)
Compatibility Write Protect Pin for Hardware Data Protection 8-byte Page (2K), 16-byte Page (4K) Write
Modes Partial Page Writes Allowed Self-timed Write Cycle (5 ms max) High-reliability – Endurance: 1 Million Write Cycles – Data Retention: 100 Years 8-lead PDIP, 8-lead JEDEC SOIC and 8-lead
TSSOP Packages
General Description
The 24C02 / 24C04 provides 2048/4096 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 256/512 words of 8 bits each The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The 24C02 /
24C04 is available in space-saving 8-lead PDIP, 8-lead JEDEC SOIC, and 8-lead TSSOP packages and is accessed via a Two-wire serial interface. In addition, the 24C02 / 24C04 is available in 1.8V (1.8V to 5.5V) version.
Pin Configuration
1/15
MRD
24C02/24C04
Pin Descriptions
Pin number
1–3
5 6
7 4 8 1
Designation
A0 - A2
SDA SCL
WP GND VCC NC
Type
I
I/O & Open-drain I
I
P P NC
Name and Functions Address Inputs ...
Similar Datasheet