Very Low Ron Load Switch
POWER MANAGEMENT
Features
Input Voltage Range – 1.1V to 3.6V 500mA Continuous Output Current Ultra-Low Ron – 90mΩ ...
Description
POWER MANAGEMENT
Features
Input Voltage Range – 1.1V to 3.6V 500mA Continuous Output Current Ultra-Low Ron – 90mΩ Automatic Output Discharge Circuit
Fast Turn-on Option With No Output Discharge Circuit – SC704
Extended Soft Start Option With Automatic Output Discharge Circuit – SC705
Low Shutdown Quiescent Current Hardened ESD Protection 5kV Package: CSP – 0.76mm × 0.76mm, 0.4mm Pitch
SC704/SC705
500mA Low Vin, Very Low Ron Load Switch
Description
The SC704/SC705 is a low input voltage, low Ron load switch, designed for use in battery powered applications. Integrated circuitry controls the switch to minimize resistance over a wide range of conditions. The device provides controlled soft-start to limit inrush current. The SC705 features an automatic discharge circuit which discharges the output when the part is disabled. The SC704/SC705 is offered in an ultra-small 4-bump 0.76mm×0.76mm Chip Scale Package (CSP) which enables very small board area implementations. The SC704/SC705 has an operating temperature range of -40°C to +85°C.
Applications
Smart Phones Tablet PCs GPS devices Battery powered equipment Other portable Device
Device SC704 SC705
Package CSP
Automatic Discharge
Rising Time
No 6.7µs(Typ.)
CSP Yes 137µs(Typ.)
Typical Application Circuit
SUPPLY
1µF
ENABLE
VIN VOUT
SC704 / SC705
EN GND
LOAD
1µF
Rev. 2.4
© 2015 Semtech Corporation
Pin Configuration
TO P VIEW (BUMPS ON THE BOTTOM )
A1 A2
B1 B2
CSP 0.76x0.76, 4 Bump
Marki...
Similar Datasheet