S1A

S1A-S1M 1.0AMP.Surface Mount Rectifiers SMA/DO-214AC Features For surface mounted application Glass passivated junction chip. Low forward voltage drop High current capability Easy pick and place High surge current capability Plastic material used carries Underwriters Laboratory Classification 94V-0 High temperature soldering: 260oC / 10 seconds at terminals Mechanical Data Case: Molded plastic Polarity: Indicated by cathode band Packaging: 12mm tape W eight: 0.064 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol S1A S1B S1D S1G S1J Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TL =110 oC VRRM VRMS VDC I(AV) 50 100 200 400 600 35 70 140 280 420 50 100 200 400 600 1.0 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 40 Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current @ TA =25 oC at Rated DC Blocking Voltage @ TA=125 oC VF IR 1.1 1.0 50 Typical Reverse Recovery Time (Note 1) Trr 1.5 Typical Junction Capacitance ( Note 2 ) Cj 12 Non-Repetitive Peak Reverse Avalanche Engergy at 25oC, IAS=1A, L=10mH Typical Thermal Resistance (Note 3) Operating Temperature Range EAS RθJL...