KBP201G-KBP207G
Single Phase 2.0AMP. Glass Passivatec Bridge Rectifiers
KBP
Features
Glass passivated junction Ideal for printed circuit board Reliable low cost construction technique results in inexpensive product High temperature soldering guaranteed: 260o C / 10 seconds at 5 lbs. ( 2.3 Kg ) tension Small size, simple installation
.460(11.68) .420(10.6)
.035(0.9) .028(0.7)
AC
.5 (12.7) MIN
.160(4.1) .140(3.6)
SPACING
.600(15.24) .560(14.22)
.153(3.9) .146(3.7)
.050(1.27)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
Type Number
Symbol KBP KBP KBP KBP KBP KBP KBP Units
201G 202G 203G 204G 205G 206G 207G
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current @TA = 50 oC
I(AV)
2.0
A
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method )
Rating for Fusing ( t<8.35ms )
IFSM I2t
60 A 15 A2sec
Maximum Instantaneous Forward Voltage @ 3.14A
VF
1.2
V
Maximum DC Reverse Current @ TA=25 oC at Rated DC Blocking Voltage @ TA=125 oC
IR
10 uA 500 uA
Typical thermal resistance (Note)
RθJA RθJL
25 8
oC/W
Operating Temperature Range
TJ
-55 to +150
oC
Storage Temperature Range
TSTG
-55 to +150
oC
Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B.
With 0.4” x 0.4” (10 x 10mm) Copper Pads.
http://www.luguang.cn
mail:
[email protected]
AVERAGE FORWARD CURRENT. (A)
KBP201G-KBP207G
Single Phase 2.0AMP. Glass Passivatec Bridge Rectifiers
RATINGS AND CHARACTERISTIC CURVES (KBP201G THRU KBP207G)
FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE
2.0
FIG.2- TYPICAL REVERSE CHARACTERISTICS
PER BRIDGE ELEMENT
100
1.5 TJ=1250C
INSTANTANEOUS REVERSE CURRENT. ( A)
1.0 10
0.5
0 20 40
60 80 100 120 AMBIENT TEMPERATURE. (oC)
140 150
FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT
60
50
40
30
20 10
0
1
2
46
10
20
40 60 100
NUMBER OF CYCLES AT 60Hz
FIG.5- TYPICAL FORWARD CHARACTERISTICS PER BRIDGE ELEMENT
10
1
JUNCTION CAPACITANCE.(pF)
1 TJ=250C
0.1
0
20 40
60
80 100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
FIG.4- TYPICAL JUNCTION CAPACITANCE
1000
600
500 Tj=250C
400
300
200
100
0 0.1
0.5 1
2 5 10 20 50 100 200 REVERSE VOLTAGE. (V)
500 800
PEAK FORWARD SURGE CURRENT. (A)
INSTANTANEOUS FORWARD CURRENT. (A)
0.1
0.01 0.6
Tj=250C PULSE WIDTH-300 S 1% DUTY CYCLE
0.7 0.8 0.9 1.0 1.1 1.2 1.3 INSTANTANEOUS FORWARD VOLTAGE. (V)
1.4
http://www.luguang.cn
mail:
[email protected]
Version: A06
.