MUR1005-MUR1060
Super Fast Rectifiers
VOLTAGE RANGE: 50 --- 600 V CURRENT: 10 A
Features
Low cost Low leakage Low forward voltage drop High current capability Eas ily cleaned with alcohol,Is opropanol and s im ilar s olvents The plas tic m aterial carries U/L recognition 94V-0
Mechanical Data
Cas e:JEDEC TO-220AC,molded plastic Polarity: As marked Weight: 0.069 ounces,1.96 grams Mounting pos ition: Any
2.8± 0.1
TO-220AC
10.2± 0.2
3.8± 0.15
4.5± 0.2 1.4± 0.2
3.5± 0.3 13.8± 0.5
8.9± 0.2
19.0± 0.5
PIN 12
2.6± 0.2
0.9± 0.1
5.0± 0.1
0.5± 0.1
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 am bient tem perature unles s otherwis e s pecified. Single phas e,half wave,60 Hz,res is tive or inductive load. For capacitive load,derate by 20%.
MUR MUR MUR MUR 1005 1010 1015 1020
MUR 1040
MUR 1060
UNITS
Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average f orw ard rectif ied current
@TC=100 Peak f orw ard surge current
8.3ms single half -sine-w ave superimposed on rated load @TJ=125
Maximum instantaneous f orw ard voltage @ 10A
VRRM VR MS VDC
IF (AV)
50 35 50
IF SM
VF
100 150 200 400 600 70 105 140 280 420 100 150 200 400 600
10
125
0.975
1.3 1.5
V V V A
A
V
Maximum reverse current
@TA=25
at rated DC blocking voltage @TA=125
Maximum reverse recovery time (Note1)
Operating junction temperature range Storage temperature range
NOTE: 1. Measured with IF=0.5A, IR=1A, Irr=0.25A.
IR
trr TJ TSTG
5.0 250 25
- 55 ----- + 150
- 55 ----- + 150
10.0 500 50
A ns
http://www.luguang.cn
mail:
[email protected]
INSTANTANEOUS FORWARD CURRENT AMPERES
MUR1005~MUR1020 MUR1040 MUR1060
MUR1005-MUR1060
Super Fast Rectifiers
Ratings AND Charactieristic Curves
FIG.1 -- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC
50 10 N 1. N 1.
(+) 25VDC (approx) (-)
D.U.T.
1 NONINDUCTIVE
OSCILLOSCOPE (NOTE 1)
PULSE GENERATOR
(NOTE2)
NOTES:1.RISE TIME = 7ns MAX.INPUTIMPEDANCE =1M . 22pF. JJJJ 2.RISE TIME =10ns MAX.SOURCE IMPEDANCE=50 .
+0.5A
0 -0.25A
trr
-1.0A
1cm
SETTIMEBASEFOR10/20 ns/cm
FIG.2 -- TYPICAL FORWARD CHARACTERISTIC
1000
100
10
1.0
0.1 .6
Tj=25oC Pulse Width=300 s 1% Duty Cycle
.8 1.0 1.2 1.4 1.6 1.8 2.0
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
PEAK FORWARD SURGE CURRENT AMPERES
FIG.3 -- PEAK FORWARD SURGE CURRENT
125
100 8.3ms Single Half Sine Wave TJ=125
75
50
25
0 1 10
100
NUMBER OF CYCLES AT 60Hz
AVERAGE FORWARD CURRENT AMPERES
FIG.4-FOzRWORD DERATING CURVE
12
10
8.0 6.0
Single Phase
4.0 Half Wave 60HZ
Resistive or Inductive Load
2.0 0 0 25 50 75 100 125 150 175
CASE TEMPERATURE,
http://www.luguang.cn
mail:
[email protected]
.