MINIATURE GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER
MINIATURE GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER
MPG06A THRU MPG06M 50V-1000V 1.0A
FEATURES
♦ Plastic package has...
Description
MINIATURE GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER
MPG06A THRU MPG06M 50V-1000V 1.0A
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0
♦ Low forward voltage, high current capability ♦ Glass passivated chip junction ♦ High surge capability ♦ Typical IR less than 0.1µA ♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension
Mechanical Data
Case: Molded plastic over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.0064 ounce, 0.181 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=25°C
Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.0A
Maximum DC reverse current at rated DC blocking voltage
TA=25°C TA=125°C
Typical junction capacitance
(NOTE 1)
Typical reverse recovery time
(NOTE 2)
Typical thermal resistance
(NOTE 3)
Operating junction and storage temperature range
MPG SYMBOLS 06A
VRRM 50 VRMS 35 VDC 50
I(AV)
MPG 06B
100
70
100
IFSM
VF
IR
CJ trr RΘJA RΘJL TJ, TSTG
NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2...
Similar Datasheet