Document
KBP005G THRU KBP10G
SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 to 1000V
Current:1.5A
Features
Glass passivated chip junction High case dielectric strength High surge current capability Ideal for printed circuit board
KBP
Mechanical Data
Terminal: Plated leads solderable per MIL-STD 202E, Method 208C
Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: any
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%)
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified output current Ta = 40℃
Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage drop per leg at 2.0A
Rating for fusing (t < 8.3ms)
Symbol Vrrm Vrms Vdc If(av) Ifsm Vf I2t
KBP 005G
50 35
50
Maximum DC reverse current at rated DC blocking voltage per leg
Typical Thermal Resistance
Ta = 25°C Ta = 125°C
(Note 1) (Note 1) (Note 2)
Ir
Rth(ja) Rth(jl) Rth(jc)
Typical junction capacitance per leg at 4.0V,1MHz
Cj
KBP 01G 100 70
100
KBP 02G 200
140
200
KBP 04G 400 280 400
1.5
50
1.1
10 5.0 500 25 8.0 10.0
15
KBP 06G 600
420
600
KBP 08G 800
560
800
KBP 10G 1000
700
1000
units
V V V A
A V A2Sec
µA
℃/W
pF
Operating junction and storage temperature range
Tj, Tstg
-55 to +150
℃
Note: 1. 2.
Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B. with 0.4″×0.4″(10×10mm)copper pads Thermal Resistance from Junction to Case Mounted on heatsink
Rev.A2
www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES KBP005G THRU KBP10G
Rev.A2
www.gulfsemi.com
.