DatasheetsPDF.com

R5F2136CANFP Dataheets PDF



Part Number R5F2136CANFP
Manufacturers Renesas
Logo Renesas
Description MCU
Datasheet R5F2136CANFP DatasheetR5F2136CANFP Datasheet (PDF)

R8C/36A Group RENESAS MCU PRELIMINARY Notice: This is not a final specification. Some parametric limits are subject to change. REJ03B0265-0110 Rev.1.10 Sep 28, 2009 1. Overview 1.1 Features The R8C/36A Group of single-chip MCUs incorporate the R8C CPU core, employing sophisticated instructions for a high level of efficiency. With 1 Mbyte of address space, and it is capable of executing instructions at high speed. In addition, the CPU core boasts a multiplier for high-speed operation processin.

  R5F2136CANFP   R5F2136CANFP


Document
R8C/36A Group RENESAS MCU PRELIMINARY Notice: This is not a final specification. Some parametric limits are subject to change. REJ03B0265-0110 Rev.1.10 Sep 28, 2009 1. Overview 1.1 Features The R8C/36A Group of single-chip MCUs incorporate the R8C CPU core, employing sophisticated instructions for a high level of efficiency. With 1 Mbyte of address space, and it is capable of executing instructions at high speed. In addition, the CPU core boasts a multiplier for high-speed operation processing. Power consumption is low, and the supported operating modes allow additional power control. These MCUs are designed to maximize EMI/EMS performance. Integration of many peripheral functions, including multifunction timer and serial interface, reduces the number of system components. The R8C/36A Group have data flash (1 KB × 4 blocks) with the background operation (BGO) function. 1.1.1 Applications Electronic household appliances, office equipment, audio equipment, consumer equipment, etc. REJ03B0265-0110 Rev.1.10 Sep 28, 2009 Page 1 of 55 Under development Preliminary specification Specifications in this manual are tentative and subject to change. R8C/36A Group 1. Overview 1.1.2 Specifications Tables 1.1 and 1.2 outline the Specifications for R8C/36A Group. Table 1.1 Specifications for R8C/36A Group (1) Item CPU Function Central processing unit Memory ROM, RAM, Data flash Power Supply Voltage detection Voltage circuit Detection I/O Ports Programmable I/O ports Clock Clock generation circuits Interrupts Watchdog Timer DTC (Data Transfer Controller) Timer Timer RA Timer RB Timer RC Timer RD Specification R8C CPU core • Number of fundamental instructions: 89 • Minimum instruction execution time: 50 ns (f(XIN) = 20 MHz, VCC = 2.7 to 5.5 V) 200 ns (f(XIN) = 5 MHz, VCC = 1.8 to 5.5 V) • Multiplier: 16 bits × 16 bits → 32 bits • Multiply-accumulate instruction: 16 bits × 16 bits + 32 bits → 32 bits • Operation mode: Single-chip mode (address space: 1 Mbyte) Refer to Table 1.3 Product List for R8C/36A Group • Power-on reset • Voltage detection 3 (detection level of voltage detection 0 and voltage detection 1 selectable) • Input-only: 1 pin • CMOS I/O ports: 59, selectable pull-up resistor • 3 circuits: XIN clock oscillation circuit, XCIN clock oscillation circuit (32 kHz), Low-speed on-chip oscillator • Oscillation stop detection: XIN clock oscillation stop detection function • Frequency divider circuit: Dividing selectable 1, 2, 4, 8, and 16 • Low power consumption modes: Standard operating mode (high-speed clock, low-speed clock, low-speed onchip oscillator), wait mode, stop mode Real-time clock (timer RE) • Interrupt Vectors: 69 • External: 9 sources (INT × 5, key input × 4) • Priority levels: 7 levels • 14 bits × 1 (with prescaler) • Reset start selectable • Low-speed on-chip oscillator for watchdog timer selectable • 1 channel • Activation sources: 39 • Transfer modes: 2 (normal mode, repeat mode) 8 bits (with 8-bit prescaler) Timer mode (period timer), pulse output mode (output level inverted every period), event counter mode, pulse width measurement mode, pulse period measurement mode 8 bits × 1 (with 8-bit prescaler) Timer mode (period timer), programmable waveform generation mode (PWM output), programmable one-shot generation mode, programmable wait oneshot generation mode 16 bits × 1 (with 4 capture/compare registers) Timer mode (input capture function, output compare function), PWM mode (output 3 pins), PWM2 mode (PWM output pin) 16 bits × 2 (with 4 capture/compare registers) Timer mode (input capture function, output compare function), PWM mode (output 6 pins), reset synchronous PWM mode (output three-phase waveforms (6 pins), sawtooth wave modulation), complementary PWM mode (output three-phase waveforms (6 pins), triangular wave modulation), PWM3 mode (PWM output 2 pins with fixed period) REJ03B0265-0110 Rev.1.10 Sep 28, 2009 Page 2 of 55 Under development Preliminary specification Specifications in this manual are tentative and subject to change. R8C/36A Group 1. Overview Table 1.2 Specifications for R8C/36A Group (2) Item Timer Function Timer RE Timer RF Timer RG Serial Interface UART0, UART1 UART2 Synchronous Serial Communication Unit (SSU) I2C bus LIN Module A/D Converter D/A Converter Comparator A Comparator B Flash Memory Operating Frequency/Supply Voltage Current consumption Operating Ambient Temperature Package Specification 8 bits × 1 Output compare mode 16 bits × 1 Input capture mode (input capture circuit), output compare mode (output compare circuit) 16 bits × 1 Timer mode (input capture function, output compare function), PWM mode (output 1 pin), phase counting mode (available automatic measurement for the counts of 2-phase encoder) Clock synchronous serial I/O/UART × 2 channel Clock synchronous serial I/O, UART, I2C mode (I2C bus), multiprocessor communication function 1 (shared with I2C bus) 1 (shared with SSU) Hardware LIN: 1 (timer RA, UART0) 10-bit res.


R5F2136AANFP R5F2136CANFP R5F21364ANFA


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)