FEATURES
►SIP Package with Industry Standard Pinout ►Package Dimension:
19.5 x 10.2 x 7.6 mm (0.77”x 0.4”x 0.3”) ►Single and Dual Output Models ►I/O-Isolation 1000 VDC ►Operating Temp. Range -40°C to +85°C ►3 Years Product Warranty
MAU300 SERIES
DC/DC CONVERTER 2W, SIP-Package
PRODUCT OVERVIEW
The MINMAX MAU300 series is a range of 2W DC/DC converters in a small SIP Package featuring an I/O-isolation of 1000VDC. An excellent efficiency allows an operating temperature range of –40°C to +85°C. These converters offer an economical solution for many applications where a voltage has to be isolated i.e for noise reduction, ground loop elimination, digital interfaces or for board level power distribution with isolated voltages.
Model Selection Guide
Model
Input
Number
Voltage
(Range)
MAU301
VDC
MAU302
MAU303 MAU304 MAU305
5 (4.5 ~ 5.5)
MAU306
MAU307
MAU311
MAU312
MAU313 MAU314 MAU315
12 (10.8 ~ 13.2)
MAU316
MAU317
MAU321
MAU322
MAU323 MAU324 MAU325
24 (21.6 ~ 26.4)
MAU326
MAU327
Output
Voltage
VDC 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15
Output Current
Max. Min.
mA mA 500 10 400 8 165 3 133 2.5 ±200 ±4 ±83 ±1.5 ±66 ±1 500 10 400 8 165 3 133 2.5 ±200 ±4 ±83 ±1.5 ±66 ±1 500 10 400 8 165 3 133 2.5 ±200 ±4 ±83 ±1.5 ±66 ±1
Input Current
@Max. Load
mA(typ.)
452 526 495 499 519 504 501 185 212 200 200 210 201 200 92 108 101 101 105 102 100
@No Load mA(typ.)
60
30
15
Load Max. capacitive
Regulation
Load
% (max.)
11 11 7 7 10 7 7 8 8 5 5 8 5 5 8 8 5 5 8 5 5
µF 470 390# 470 390# 470 390# # For each output
Efficiency
(typ.)
@Max. Load
%
73 76 80 80 77 79 79 74 78 82 83 79 82 82 74 77 81 82 79 81 82
Input Specifications
Parameter
Input Voltage Range
Input Surge Voltage (1 sec. max.)
Reverse Polarity Input Current Internal Filter Type Internal Power Dissipation
Model 5V Input Models 12V Input Models 24V Input Models 5V Input Models 12V Input Models 24V Input Models
All Models
Min. Typ. Max. Unit
4.5 5 5.5
10.8 12 13.2
21.6 -0.7
24 ---
26.4 9
VDC
-0.7 ---
18
-0.7 ---
30
--- --- 0.3 A
Pi Filter
--- --- 650 mW
E-mail:
[email protected] Tel:886-6-2923150 2013/01/23 REV:4 Page 1 of 4
MAU300 SERIES
DC/DC CONVERTER 2W, SIP-Package
Output Specifications
Parameter Output Voltage Accuracy Output Voltage Balance Line Regulation Load Regulation Ripple & Noise Temperature Coefficient Short Circuit Protection
Conditions
Dual Output, Balanced Loads For Vin Change of 1% Io=20% to 100% max. 20MHz Bandwidth
Min. Typ. Max. Unit
--- ±1.0 ±3.0 %
--- ±0.1 ±1.0 %
--- ±1.2 ±1.5 %
See Model Selection Guide
--- 100 150 mV P-P
---
±0.01
±0.02
%/℃
0.5 Second Max.
General Specifications
Parameter I/O Isolation Voltage (rated) I/O Isolation Resistance I/O Isolation Capacitance Switching Frequency MTBF (calculated)
Conditions 60 Seconds 500 VDC 100KHz, 1V
MIL-HDBK-217F@25℃, Ground Benign
Min. 1000 1000
--50 2,000,000
Typ. ----80 80 ---
Max. Unit --- VDC --- MΩ 120 pF 100 KHz --- Hours
Input Fus.