THREE PHASE DIODE THYRISTOR
DFA150AA80/160
SanRex Power Module, DFA150AA, is complex isolated module which is designed for rash current circuit. It contains six diodes connected in a three phase bridge configuration, and a thyristor connected to a direct current line.
This Module is designed very compactly. Because diode module and thyristor put together. This Module is also isolated type between electorode terminal and mounting base. So you can put this Module and other one together in a same fin. Application Inverter for AC or DC motor control, Current stabilized power supply, Switching power supply.
DIODE Maximum Ratings
Symbol
Item
VRRM VRSM
Repetitive Peak Reverse Voltage Non-Repetitive Peak Reverse Voltage
DFA150AA80 800 960
Ratings
DFA150AA160 1600 1700
Unit
Unit V V
Symbol ID IFSM Tj
Tstg VISO
Item
Output Current (D.C.)
Surge forward current
Operating Junction Temperature
Storage Temperature
Isolation Breakdown Voltage (R.M.S.)
Mounting Torque
Mounting M5 Terminal M6 Terminal M4
Mass
Conditions Three phase full wave, Tc 93
cycle, 50/60HZ, peak value, non-repetitive
A.C. 1minute Recommended Value 1.5-2.5 15-25 Recommended Value 2.5-3.9 25-40 Recommended Value 1.0-1.4 10-14 Typical Value
Ratings 150
1460/1600 40 to 150 40 to 125 2500 2.7 28 4.7 48 1.5 15 460
Unit A A
V Nm kgf B
g
Electrical Characteristics
Symbol
Item
IRRM Repetitive Peak Reverse Current,max.
VFM Forward Voltage Drop,max.
Rth j-c Thermal Impedance, max.
Rth c-f Thermal Impedance, max.
Conditions Tj 150 VR=VRRM IF 150A Inst. measurement Junction to Case TOTAL Case to fin
Ratings 15 1.35 0.14 0.07
Unit mA V
/W /W
SanRex®
50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail:
[email protected]
DFA150AA80/160
THYRISTOR Maximum Ratings
Symbol
Item
VRRM VRSM VDRM
Repetitive Peak Reverse Voltage Non-Repetitive Peak Reverse Voltage Repetitive Peak off-State Voltage
DFA150AA80 800 960 800
Ratings
DFA150AA160 1600 1700 1600
Symbol IT AV ITSM I2t di dt VISO Tj Tstg
Item
Average On-State Current
Surge On-State Current
I2t for fusing
Critical Rate of Rise of On-State Current
Isolation Breakdown Voltage (R.M.S.)
Operating Junction Temperature
Storage Temperature
Mounting Torque
Mounting M5 Terminal M6 Terminal M4
Mass
Conditions Singl phase half wave. 180 conduction, Tc 93
cycle, 50/60HZ, peak value, non-repetitive
IG 100mA VD 1 2VDRM diG/dt 0.1A/ s A.C. 1minute
Recommended Value 1.5-2.5 15-25 Recommended Value 2.5-3.9 25-40 Recommended Value 1.0-1.4 10-14 Typical Value
Ratings 150
1460/1600 10670 150 2500
40 to 135 40 to 125 2.7 28 4.7 48 1.5 15
460
Unit
V V V
Unit A A A2S
A/ s V
Nm fB
g
Electrical Characteristics
Symbol
Item
IDRM Repetitive Peak Off-State Current,max.
IRRM Repetitive Peak Reverse Current,max.
VTM Peak On-State Voltage,max.
IGT Gate Trigger Current,max.
VGT Gate Trigger Voltage,max.
dv dt
Critical Rate of Rise of OffState Voltage,min.
Rth j-c Thermal Impedance, max.
Rt.