Phase Control Thyristor
DCR1110F52
Phase Control Thyristor
DS5965-3 August 2014 (LN31843)
FEATURES
Double Side Cooling High Surge Capabili...
Description
DCR1110F52
Phase Control Thyristor
DS5965-3 August 2014 (LN31843)
FEATURES
Double Side Cooling High Surge Capability
APPLICATIONS
High Power Drives High Voltage Power Supplies Static Switches
VOLTAGE RATINGS
Part and Ordering Number
Repetitive Peak Voltages
VDRM and VRRM V
Conditions
DCR1110F52* DCR1110F50
5200 5000
Tvj = -40°C to 125°C, IDRM = IRRM = 100mA, VDRM, VRRM tp = 10ms, VDSM & VRSM = VDRM & VRRM + 100V respectively
Lower voltage grades available. *5000V @ -40oC, 5200V @ 0oC
KEY PARAMETERS
VDRM IT(AV) ITSM dV/dt*
dI/dt
5200V 1107A 14800A 1500V/µs 800A/µs
* Higher dV/dt selections available
Outline type code: F (See Package Details for further information)
ORDERING INFORMATION
When ordering, select the required part number shown in the Voltage Ratings selection table.
For example:
DCR1110F52
Note: Please use the complete part number when ordering and quote this number in any future correspondence relating to your order.
Fig. 1 Package outline
www.dynexsemi.com
1/10
SEMICONDUCTOR
CURRENT RATINGS
Tcase = 60°C unless stated otherwise
Symbol
Parameter
Double Side Cooled
IT(AV)
Mean on-state current
IT(RMS) RMS value
IT Continuous (direct) on-state current
Test Conditions
Half wave resistive load -
DCR1110F52
Max. Units
1107 1739 1684
A A A
SURGE RATINGS
Symbol
Parameter
ITSM Surge (non-repetitive) on-state current I2t I2t for fusing
Test Conditions 10ms half sine, Tcase = 125°C
VR = 0
Max. 14.8 1.097
Units
kA MA2s
THERMA...
Similar Datasheet