TS1916
1.7A Boost WLED Driver
SOT-26
Pin Definition: 1. Switch 2. Ground 3. Feedback 4. Enable 5. OVP 6. VCC
General ...
TS1916
1.7A Boost WLED Driver
SOT-26
Pin Definition: 1. Switch 2. Ground 3. Feedback 4. Enable 5. OVP 6. VCC
General Description
The TS1916 is a step-up (Boost) converter designed for driving up to 10 series white LEDs for backlighting application. The TS1916 uses current mode, 1MHz fixed frequency architecture to regulate the LED current, which is set through an external current sense resistor. It’s low feedback voltage reduces power loss and improves efficiency. The OVP pin monitors the output voltage and turns off the converter if an over-voltage condition is present due to an open circuit condition. The TS1916 includes under-voltage lockout, current limiting and thermal shutdown protection preventing damage in the event of an output overload.
Features
● 2.5V to 5.5V operating input voltage range ● Drives up to 10 series white LEDs ● 1MHz fixed switching frequency ● Wide range for PWM dimming (200Hz to 200kHz) ● Internal 1.7A switching current limit ● Over voltage protection (OVP) ● Internal soft-start function ● Current limit and thermal shutdown protection ● Under voltage lockout
Application
● Digital Still Cameras ● Portable Electronics ● PDAs and Palm-Top Computers ● Local Boost
Regulator
Ordering Information
Part No.
Package
Packing
TS1916CX6 RFG SOT-26
3kpcs / 7” Reel
Note: “G” denotes for Halogen- and Antimony-free as those which
contain <900ppm bromine, <900ppm chlorine (<1500ppm
total Br + Cl) and <1000ppm antimony compounds
Absolute Maximum Ratings...