Document
MAB46
Product profile Single Phase Ultra Low VF Schottky Bridge Rectifier General description Schottky Rectifiers 4 Amp 60V
Features • Ideal for printed circuit board. • High current capability • Reliable low cost construction utilizing molded plastic technique. • Low forward voltage drop • Low power loss, high efficiency • High surge current capability • High temperature soldering guaranteed 260°C /10sec/0.375" lead length at 5 lbs tension • Small size, simple installation.
Mechanical data Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: MIL-STD- 202E, Method 208 guaranteed Polarity: As marked
Maximum Ratings (Tc=25°C unless otherwise noted) Parameter
Maximum repetitive peak reverse voltage
RMS Voltage (Max.)
Working peak reverse voltage
Maximum average forward rectified current
Total Device
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
Operating junction temperature range
Storage temperature range
Symbol VRRM VRMS VRWM IF(AV)
IFSM
TJ TSTG
MAB46 60 50 60 4
60
-55 to +150 -55 to +150
Unit V V V A
A
°C °C
THERMAL CHARACTERISTICS Parameter
Symbol
Typical thermal resistance
RθJA
Notes:
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width ≤ 40 ms
Publication Order Number: MAB46
Value 75
Unit °C/W
©Bruckewell Technology Corporation Rev. A -2014
MAB46
Electrical characteristics (Tc=25°C unless otherwise noted) OFF CHARACTERISTICS
Parameter
Symbol
Instantaneous forward voltage at IF=4A, Tj=25°C at IF=4A, Tj=125°C
Maximum reverse current Tj=25°C at working peak reverse voltage Tj=125°C Junction Capacitance @ DC 5V
VF
IR CJ
Value Typical
0.60 0.56
200 50 205
Max
0.66 0.61
Unit
V u'A m'A pF
DEVICE MARK MAB46
Publication Order Number: MAB46
©Bruckewell Technology Corporation Rev. A -2014
MAB46
Characteristic Curves
Publication Order Number: MAB46
©Bruckewell Technology Corporation Rev. A -2014
MAB46
Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein.
Publication Order Number: MAB46
©Bruckewell Technology Corporation Rev. A -2014
.