MBR2H200SFT3G
Surface Mount Schottky Power Rectifier
Plastic SOD−123FL Package
This device uses the Schottky Barrier p...
MBR2H200SFT3G
Surface Mount
Schottky Power Rectifier
Plastic SOD−123FL Package
This device uses the
Schottky Barrier principle with a large area metal−to−silicon power diode. Ideally suited for low voltage, high frequency rectification or as free wheeling and polarity protection diodes in surface mount applications where compact size and weight are critical to the system. Because of its small size, it is ideal for use in portable and battery powered products such as cellular and cordless phones, chargers, notebook computers, printers, PDAs and PCMCIA cards. Typical applications are AC−DC and DC−DC converters, reverse battery protection, and “Oring” of multiple supply voltages and any other application where performance and size are critical.
Features
Guardring for Stress Protection Low Forward Voltage Epoxy Meets UL 94 V−0 Package Designed for Optimal Automated Board Assembly These are Pb−Free Devices
Mechanical Characteristics
Reel Options: MBR2H200SFT3G = 10,000 per 13 in reel/8 mm tape Device Marking: L2J Polarity Designator: Cathode Band Weight: 11.7 mg (approximately) Case: Epoxy, Molded Lead Finish: 100% Matte Sn (Tin) Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
Device Meets MSL 1 Requirements
http://onsemi.com
SCHOTTKY BARRIER RECTIFIER
2.0 AMPERES 200 VOLTS
SOD−123FL CASE 498
MARKING DIAGRAM
L2JMG G
L2J = Specific Device Code M = Date Code G = Pb−Free Package (Note: Microdot may be in either lo...