Dual Solid State Relay
Dual Solid State Relay
FEATURES
Dual Solid State SCR Output Panel Mount Built in Snubber Opto-Isolati...
Description
Dual Solid State Relay
FEATURES
Dual Solid State SCR Output Panel Mount Built in Snubber Opto-Isolation Between Input and Output RoHS Compliant
PCS28
E93379
INPUT PARAMETERS (Ta = 25°C)
Control Voltage Range
1D 2D
Must Turn-On Voltage
1D 2D
Control Currentt
1D 2D
4 - 15 VDC 15 - 32 VDC
4 VAC 15 VAC 8 - 50 mA
6 - 30 mA
Input Resistance Must Turn-Off Voltage
1D 330 Ω 2D 1.5 kΩ
1 VDC
CHARACTERISTICS
4000 VAC, 50 Hz/60 Hz, 1 min. (Input to Output)
Dielectric Strength
2500 VAC, 50 Hz/60 Hz, 1 min. (Input, Output to Output)
Insulation Resistance
Operating Temperture
1000 MΩ at 500 VDC - 30°C to 80°C
Storage Temperature
- 30°C to 100°C
Weight
Approximately 83 g
OUTPUT PARAMETERS (Ta = 25°C)
-24, 25 -38, 25 -24, 40 -38, 40 -24, 50 -38, 50
Load Voltage Range (VAC)
48-280 48-440 48-280 48-440 48-280 48-440
Max. Transient Voltage (Vpk)
600
800
600
800
600
800
Load Current Range
0.1 - 25 A
0.1 - 40 A 0.1 - 50 A
Max. Surge Current (10 ms)
300
400
500
Max. I2t (10 ms, A2s) Max. On-State Voltage
450
800
1.5 VRMS
1250
Max. Off-State Leakage Current
10 mA
Min. Off-State dv/dt Max. Turn-On Time Max. Turn-Off Time Frequency Range Min. Power Factor
500 V/us Zero –Cross: 1/2 Cycles + 1 ms; Random: 1 ms
1/2 Cycles + 1 ms 47 - 63 Hz 0.5
PRECAUTIONS
1. Make sure that the polarity is correct when connecting, to avoid damage to the relay.
2. Apply heat-conducting silicon grease or a thermal transfer pad on the space bet...
Similar Datasheet