DatasheetsPDF.com

SMP-0SCMC Dataheets PDF



Part Number SMP-0SCMC
Manufacturers STMicroelectronics
Logo STMicroelectronics
Description Trisil for telecommunication equipment protection
Datasheet SMP-0SCMC DatasheetSMP-0SCMC Datasheet (PDF)

SMP-0SCMC Trisil™ for telecommunication equipment protection Features ■ Bidirectional crowbar protection ■ Repetitive peak pulse current (Tamb -40 °C to +85 °C) – IPP = 100 A (10/1000 µs) – IPP = 200 A (5/310 µs) – IPP = 500 A (2/10 µs) ■ Breakdown voltage: from 72 V to 310 V ■ Operating Tj max: 150 °C ■ Micro capacitance technology ■ JEDEC registered package outline Complies with the following standards ■ Telcordia GR-1089 ■ ITU-T K20/21/45 enhanced level ■ TIA-968 ■ YD/T 950 / 993 / 1082 ■ I.

  SMP-0SCMC   SMP-0SCMC



Document
SMP-0SCMC Trisil™ for telecommunication equipment protection Features ■ Bidirectional crowbar protection ■ Repetitive peak pulse current (Tamb -40 °C to +85 °C) – IPP = 100 A (10/1000 µs) – IPP = 200 A (5/310 µs) – IPP = 500 A (2/10 µs) ■ Breakdown voltage: from 72 V to 310 V ■ Operating Tj max: 150 °C ■ Micro capacitance technology ■ JEDEC registered package outline Complies with the following standards ■ Telcordia GR-1089 ■ ITU-T K20/21/45 enhanced level ■ TIA-968 ■ YD/T 950 / 993 / 1082 ■ IEC 61000-4-5 ■ IEC 61000-4-2 level 4 – ±15 kV (air discharge) – ±8 kV (contact discharge) ■ MIL STD 883H - Method 3015-8 Class 3B ■ Resin meets UL 94, V0 ■ MIL-STD-750, method 2026 soldererabilty ■ EIA STD RS-481 and IEC 60286-3 packing ■ IPC 7531 footprint ■ UL497B recognized, UL file E136224 Datasheet  production data SMB (JEDEC DO-214AA) Description The devices in the SMP-0SCMC series are micro capacitance Trisils designed to protect broadband telecommunication equipment such as DSL modems, subscriber gateways and DSLAMs from lightning surges and power faults. Trisils are not subject to aging and provide a failsafe mode in short circuit for a better protection. They are used to help equipment to meet main standards such as UL60950, IEC950 / CSA C22.2and UL1459. The SMP-0SCMC series is packaged in SMB. January 2013 This is information on a product in full production. TM: Trisil is a trademark of STMicroelectronics Doc ID 022779 Rev 1 1/7 www.st.com 7 Characteristics 1 Characteristics SMP-0SCMC Table 1. Voltage pulse Absolute ratings (-40 °C < Tamb < 85 °C) for repetitive peak pulse current IPP 0.5/700 2/10 1.2/50 10/160 10/560 9/720 10/360 10/1000 10/700 Current pulse 0.2/310 2/10 8/20 10/160 10/560 5/320 10/360 10/1000 5/310 IPP 100 500 400 200 150 200 175 100 200 µs µs A Table 2. Symbol Absolute ratings (Tamb = 25 °C) for other parameters Parameter ITSM Non repetitive surge peak on-state current (sinusoidal)(1) Tstg Storage temperature range Tj Operating junction temperature range TL Maximum lead temperature for soldering during 10 s. 1. In fail safe mode, the device acts as a short circuit. t = 10 ms t = 0.2 s t=1s t=2s t = 15 mn Figure 1. Electrical characteristics - definitions (Tamb = 25 °C) Value 61 18 9 7 4 -55 to 150 -40 to 150 260 Symbol Parameter VRM Stand-off voltage VBO Breakover voltage IRM Leakage current IPP Peak pulse current IT On-state current IH Holding current VT On-state voltage C Capacitance IPP I IT IBO IH IRM VT V VRM VR VBO Unit A °C °C °C 2/7 Doc ID 022779 Rev 1 SMP-0SCMC Characteristics Table 3. Electrical characteristics - values (Tamb = 25 °C) IRM max @ VRM VBR VBO IH VT @ 2.2 A C @ 2 V C @ 50 V T(1) Order code Max. Typ. Max. Min. Max. Max. Max. µA V V V mA V pF pF 10-4/°C SMP0720SCMC SMP0900SCMC SMP1100SCMC SMP1300SCMC SMP1500SCMC SMP1800SCMC SMP2100SCMC SMP2300SCMC SMP2600SCMC SMP3100SCMC 5 65 72 88 150 5 75 90 98 150 5 90 110 130 150 5 120 130 160 150 5 140 150 180 150 5 170 180 220 150 5 180 210 240 150 5 190 230 260 150 5 220 260 300 150 5 275 310 350 150 3 3 3 3 3 3 3 3 3 3 80 45 9 80 45 9.1 75 40 9.3 75 40 9.5 75 40 9.7 70 35 9.9 45 25 10.2 45 25 10.3 40 20 10.6 40 20 11 1. For VBR versus junction temperature, use the following formula: VBR @ TJ = VBR @ 25 °C x (1 + T x (TJ - 25)) Figure 2. Pulse waveform %IPP 100 Repetitive peak pulse current tr = rise time (µs) tp = pulse duration time (µs) 50 0 tr tp t Figure 3. Non repetitive surge peak on-state current versus overload duration ITSM(A) 70 60 F=50Hz Tj initial = 25°C 50 40 30 20 10 0 1.E-02 1.E-01 t(s) 1.E+00 1.E+01 1.E+02 1.E+03 Doc ID 022779 Rev 1 3/7 Characteristics SMP-0SCMC Figure 4. Relative variation of holding current versus junction temperature 2,0 IH(Tj) / IH(Tj = 25 °C) 1,8 1,6 1,4 1,2 1,0 0,8 0,6 0,4 -40 -20 0 Tj (°C) 20 40 60 80 100 120 140 Figure 5. Percentage of change of break over voltage versus junction temperature % 14 12 10 8 6 4 2 0 -2 -4 -6 -8 -40 -20 0 Tj (°C) 20 40 60 80 100 120 140 Figure 6. Relative variation of junction capacitance versus reverse applied voltage (typical values) 1,4 C[VR]/C[VR =2] 1,2 F = 1 MHz VRMS = 1 V Tj = 25 °C 1,0 0,8 0,6 0,4 0,2 1 VR (V) 10 100 1000 4/7 Doc ID 022779 Rev 1 SMP-0SCMC 2 Package information Package information ● Epoxy meets UL94, V0 ● Lead-free package In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 4. SMB dimensions Dimensions Ref. Millimeters Inches E1 Min. Max. Min. Max. D A1 1.90 2.45 0.075 0.096 A2 0.05 0.20 0.002 0.008 b 1.95 2.20 0.077 0.087 E c 0.15 0.40 0.006 0.016 A1 E 5.10 5.60 0.201 0.220 C A2 E1 4.05 4.60 0.159 0.181 L b D 3.30 3.95 0.130 0.156 L 0.75 1.50 0.030 0.059 Figure 7. Footprin.


SCLT3-8BQ7 SMP-0SCMC STAP16DPS05


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)