Document
SC50A THRU SC50M
50 AMP SOZA CELL
FEATURES
..High current capability ..Low forward voltage drop .. Low leakage current ..High surge current capability
MECHANICAL DATA
. :ψ0.258(6.55) x 0.0394(1.0)
Small copper:ψ0.258(6.55) x 0.0394(1.0)Thick . :ψ0.284(7.22) x 0.0295(0.75)
Large copper:ψ0.284(7.22) x 0.0295(0.75)Thick . :ψ0.284(7.22) x 0.0866(2.2)
Outline information:ψ0.284(7.22) x 0.0866(2.2)Thick
. :。
Polarity:Large copper cathode
SC
Dimension in inches(millimeters)
TA= 25℃. ,,60HZ,., 20% MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ Ambient temp. Unless otherwise specified.Single phase, half sine wave, 60HZ,resistive or inductive load. For capacitive load, derate current by 20%
SYMBO
SC
L 50A 50B 50D 50G 50J
Maximum Current Peak Reverse Voltage
VRRM 50 100 200 400 600
Maximum RMS Voltage
VRMS 35 70 140 280 420
Maximum DC Blocking Voltage
TL=100℃ Maximum Average Forward Rectified Current
Peak Forward Surge Current 8.3ms Single Sine-wave on Rated Load (JEDEC Method)
50A Maximum Instantaneous Forward Voltage Drop at 50A DC
Maximum DC Reverse Current TA=25℃ at Rated DC Blocking Voltage TA=125℃ Typical Junction Capacitance (NOTE 1)
VDC I(AV) IFSM VF
IR CJ
50 100 200 400 600 50
500
1.0 5 250 300
Operating AND Storage Temperature Range
TSTG/ TJ
-55 to +150
NOTE: 1.Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
UNITS
50K 50M 800 1000 Volts 560 700 Volts 800 1000 Volts
Amps Amps
Volts
uA pF ℃
www.shunyegroup.com.cn
RATING ANDCHARACTERISTIC CURVES SC50A THRU SC50M
FIG. 1 –
FIG. 1 –MAXIMUM AVERAGE FORWARD CURRENT DERATING
FIG. 2 –
FIG. 2 –MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
FIG. 3 –() FIG. 3 – TYPICA REVERSE CHARACTERISTICS
FIG. 4–() FIG.4 – TYPICA FORWARD CHARACTERISTICS
FIG.5– FIG.5–TYPICAL JUNCTION CAPACITANCE
www.shunyegroup.com.cn
.