DatasheetsPDF.com

DBM-184 Dataheets PDF



Part Number DBM-184
Manufacturers RF Micro Devices
Logo RF Micro Devices
Description Subminiature Flatpack Double Balanced Mixer
Datasheet DBM-184 DatasheetDBM-184 Datasheet (PDF)

DBM-184 Subminiature Flatpack Double Balanced Mixer 2MHz to 3000MHz DBM-184 is a high performance subminiature double balanced mixer utilizing precision matched beam-lead Schottky barrier diodes. The L port has a bandwidth of 2MHz to 3000MHz, while the R port covers 2MHz to 2500MHz, and the X port covers 5MHz to 1500MHz. Inputs to any two ports within their specified frequency range will produce the sum and difference frequency at the third port, with a minimum of undesired harmonic modulation p.

  DBM-184   DBM-184


Document
DBM-184 Subminiature Flatpack Double Balanced Mixer 2MHz to 3000MHz DBM-184 is a high performance subminiature double balanced mixer utilizing precision matched beam-lead Schottky barrier diodes. The L port has a bandwidth of 2MHz to 3000MHz, while the R port covers 2MHz to 2500MHz, and the X port covers 5MHz to 1500MHz. Inputs to any two ports within their specified frequency range will produce the sum and difference frequency at the third port, with a minimum of undesired harmonic modulation products. The double balanced mixer may be used as an upconvertor, downconvertor, spectrum inverter or for any other frequency changing application. Other uses are as a phase detector, double sideband suppressed carrier modulator biphase modulator, pulse modulator, or frequency doubler. The combination of RFMD broadband transformer techniques plus the use of beam-lead Schottky barrier diodes achieve consistent low mixer noise figures and stable isolations. Precise transformer and diode balance provide two-tone third order IM ratios of better than 100dB with -30dBm input signals. Unique transformer design allows almost constant intermodulation suppression over the mixer’s entire operating frequency range. The subminiature package is sealed, RFI shielded and internally constructed to withstand severe environments. The device configuration allows convenient microstrip or printed circuit board mounting and the leads are easily soldered or welded. DBM-184 Package: Flatpack Features ■ L Port: 2MHz to 3000MHz ■ R Port: 2MHz to 2500MHz ■ X Port: 5MHz to 1500MHz ■ Consistent Low Mixer Noise Figures and Stable Isolations ■ Constant Intermodulation Suppression Over Entire Operating Frequency Range Applications ■ Milcom ■ Electronic Warfare ■ Industrial, Scientific, Medical ■ Aerospace Avionics ■ Military and Civilian Radar ■ Satellite Communications Functional Schematic Ordering Information Contact RFMD authorized sales agent or factory. RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DS131104 RF MICRO DEVICES® and RFMD® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc. 1 of 4 DBM-184 Absolute Maximum Ratings Parameter Rating Unit Operating Temperature Range -54 to +100 °C Total Input Power at 25°C 400 mW otal Input Power (Derated Linearly) at 100°C 100 mW Specifications guaranteed with IF from 5MHz to 100MHz. For higher IF frequencies, consult IF response curve for typical roll-off. Environmental conditions: All units are designed to meet their specifications between -54°C and +100°C and after exposure to any or all of the following tests per MIL-STD-202E.  Thermal Shock: Method 107D, Test Condition B  Altitude: Method 105C, Test Condition G  H.F. Vibration: Method 204C, Test Condition D  Mechanical Shock: Method 213B, Test Condition C  Random Vibration (15 minutes per axis): Method 214, Test Condition IIF  Solderability: Method 208C  Terminal Strength: Method 211A, Test Condition C  Resistance to Soldering Heat: Method 210A, Test Condition B Sealed units meet the requirements of Method 106D of MIL-STD-202E when exposed to humidity. Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Nominal Operating Parameters Parameter Specification Unit Min Typ Max Condition General Performance LO +13dBm (High side LO), RF -10dBm, IF 100MHz Operating Frequency Range L Port R Port 2 3000 MHz 2 2500 MHz X Port 5 1500 MHz Specifications guaranteed with IF from 5MHz to 100MHz. For higher IF frequencies, consult IF response curve for typical roll-off. Frequency Bands Conversion Loss L-R Isolation L-X Isolation R-X Isolation 2MHz to 1000MHz (dB) 8.0 30 30 30 1000MHz to 2500MHz (dB) 8.0 20 25 20 2500MHz to 3000MHz (dB) 15 20 - Specifications guaranteed with IF from 5MHz to 100MHz. For higher IF frequencies, consult IF response curve for typical roll-off. RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS131104 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reser.


DBM-183 DBM-184 DK2051


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)