24-channels LED driver
LED2472G
24-channels LED driver with error detection and gain control
74)3(3
0/34(3[
Features
• 24 constant c...
Description
LED2472G
24-channels LED driver with error detection and gain control
74)3(3
0/34(3[
Features
24 constant current output channels Output current: from 4 mA to 72 mA 8 x 3 independently controlled channels (RGB) Current programmable through external
resistor 7-bit global current gain adjustment in two
ranges Error detection mode (both open and shorted
LED) Programmable shorted LED detection
thresholds Auto power-saving / auto wakeup Gradual output delay (selectable) Supply voltage: 3 V to 5.5 V Thermal shutdown and thermal flag Up to 30 MHz CLK 4 wires interface 20 V current generators rated voltage
Applications
Full color large displays LED signage LED screens for indoor and outdoor billboards
Datasheet - production data
Description
The LED2472G is a monolithic, low voltage, low current power 24-bit shift register designed for LED panel displays with particular features oriented to indoor and outdoor LED screen billboards. The LED2472G guarantees 20 V of output driving capability, allowing several LEDs to be connected in series. The device is configured in 3 groups (red, green and blue) of 8 independently-controlled channels. The LED current can be separately regulated for each color within the range from 4 mA to 72 mA. This range is divided into two sub-ranges and the current can be adjusted within each range in 64 steps of resolution (6 bits per color). A single external resistor is required. All the controls and the shift registe...
Similar Datasheet