16-BIT CONSTANT CURRENT LED DRIVER
UNISONIC TECHNOLOGIES CO., LTD
L16B06
Preliminary
16-BIT CONSTANT CURRENT LED DRIVER
CMOS IC
DESCRIPTION
The L16B...
Description
UNISONIC TECHNOLOGIES CO., LTD
L16B06
Preliminary
16-BIT CONSTANT CURRENT LED DRIVER
CMOS IC
DESCRIPTION
The L16B06 is a constant-current sink driver specifically designed for LED display applications. The device incorporates shift registers, data latches, and constant current circuitry on the silicon CMOS chip. The maximum output current value of all 16 channels is adjustable by a single external resistor.
FEATURES
*Constant-current outputs: 3mA to 60mA adjustable by one external resistor
*Maximum output voltage: 17V *Maximum clock frequency: 25MHz *Power supply voltage: 3.3V to 5V *In-rush current control *Bit-to-bit skew: ±3% Chip-to-chip skew: ±6% *Package and pin assignment compatible to conventional LED
drivers
APPLICATIONS
*Indoor/Outdoor LED Video Display *LED Variable Message Signs (VMS) System
ORDERING INFORMATION
Ordering Number L16B06G-R24-R
Package SSOP-24
SSOP-24
Packing Tape Reel
MARKING
www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd
1 of 13
QW-R502-A45.c
L16B06
PIN CONNECTION
Preliminary
CMOS IC
PIN DESCRIPTION
PIN No. 1 2 3
4 5-20
21
22 23 24
PIN NAME GND DAI DCK
LAT OUT0-15
EN
DAO REXT
VDD
FUNCTION Ground terminal. Serial data input terminal. Synchronous clock input terminal for serial data transfer. Data is sampled at the rising edge of DCK. Input terminal of data strobe. Data on shift register goes through at the high level of LAT (level trigger). Otherwise, data is latched. Sink constant-current outputs...
Similar Datasheet