SDS6011

SDS6011 DC Input 1MHz Schmitt Trigger Optocoupler Description The SDS6011 consists of a light emitting diode optically coupled to an output integrated circuit detector. The output circuit integrates an optical coupler and a Schmitt Trigger providing hysteresis for noise immunity and pulse shaping. Optical coupling between the input IR LED and output structure allows for high isolation levels while maintaining low-level DC signal control capability. An open collector output allows further design flexibility. The SDS6011 comes standard in a miniature 6 pin DIP package. Applications  Logic to Logic Isolator  Programmable Current Level Sensor  Line Receiver (eliminate noise & transients)  A.C. to TTL Conversion (square wave shaping)  Digital Programming of Power Supplies  Interfacing PCs with Peripherals Schematic Diagram Anode 1 6 VCC Cathode 2 5 Ground Features  High data date – 1MHz (NRZ)  Free from latch up and oscillation  Microprocessor compatible Drive  Logic compatible output sinks 16mA @ 0.4V  Guaranteed on/off threshold hysteresis  High common mode rejection ratio  Fast switching (100nS typical tR and tF)  Wide supply voltage compatibility Agency Approvals UL/C-UL: VDE: File # E201932 File # 40035191 (EN 60747-5-2) Absolute Maximum Ratings The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. ...