POWER MANAGEMENT CONTROLLER
Si3480
Si3480 POWER MANAGEMENT CONTROLLER
Features
Enables use of a smaller power Pin programmable for overall
s...
Description
Si3480
Si3480 POWER MANAGEMENT CONTROLLER
Features
Enables use of a smaller power Pin programmable for overall
supply for a 4 or 8 port PoE
power supply capacity, port
system
power level, port priority, and
Self-contained solution operates detection timing
without the need for a host for LED indication of port status and
unmanaged operation
overall power consumption
No software required
20-pin Quad flat package
No data isolation required
(4x4 mm)
Fully compliant with IEEE 802.3
4x4 mm PCB footprint; RoHS
clause 33 for Power over Ethernet
compliant
including the 802.3at amendment Extended operating temperature
for higher power (30 W category 2 range (–40 to +85 °C)
ports)
Description
The Si3480 is a power manager intended for use with the Si3452 Power over Ethernet (PoE) controller. The Si3480 enables the use of a smaller, lower cost, and more efficiently-utilized power supply in an unmanaged PoE Power Sourcing Equipment (PSE) system.
The Si3452 is capable of delivering over 30 W per port, which means that, in a typical 8-port system, a 240 W power supply would have to be used to avoid overload. Typically, not all ports are used at full power; so, a smaller power supply in the range of 30 to 150 W can be used along with the Si3480 power management controller.
The Si3480 power management controller is pin programmed. The pins are used to set the power supply capacity, the number of low power (category 1, 15.4 W), and high power (categ...
Similar Datasheet