Document
MP50005 THRU MP5010
SILICON BRIDGE RECTIFIERS
Reverse Voltage - 50 to 1000 Volts Forward Current - 50.0 Amperes
KBPC-35
1.181(30.0) 1.102(28.0)
0.673(17.1) 0.633(16.1)
.452 MAX. (11.5)
0.480(12.2) 0.425(10.8)
HOLE FOR NO.8 SCREW
FEATURES
The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Ideal for printed circuit boards Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 260 C/10 seconds,at 5 lbs. (2.3kg) tension
0.732(18.6) 0.692(17.6)
AC
+
- AC
1.181(30.0) 1.102(28.0)
0.673(17.1) 0.633(16.1)
0.582(14.8) 0.543(13.8)
0.033x0.250 (0.8x6.4)
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case:Metal case Terminals: Plated 0.25” (6.35mm)lug. Polarity: Polarity symbols marked on case Mounting:Thru hole for #8 screw,20in.-lbs. torque max. Weight:1.02 ounce, 29 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for current capacitive load current derate by 20%.
MDD Catalog Number
SYMBOLS
MP 50005
MP 5001
MP 5002
MP 5004
MP 5006
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward output rectified current at TC=50 C (Note 1,2)
VRRM 50 100 200 400 600
VRMS
35
70 140 280 420
VDC 50 100 200 400 600
I(AV) 50
Peak forward surge current
8.3ms single half sine-wave superimposed on rated load (JEDEC Method)
IFSM
400.0
Rating for Fusing(t<8.3ms) Maximum instantaneous forward voltage dorp per bridge element at 25A
I2t VF
664 1.1
Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C Isolation voltage from case to leads Typical Thermal Resistance (Note 2) Operating junction temperature range storage temperature range
IR
VISO RθJA TJ TSTG
10 1.0 2500 2.0 -65 to +150 -65 to +150
NOTES: 1.Unit mounted on 9” x 3.5” x4.6” thick(23cmx9cmx11.8cmcm)Al.plate. 2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for
maximum heat transfer efficiency with #8 screw.
MP 5008
800 560 800
MP 5010
UNITS
1000 VOLTS 700 VOLTS 1000 VOLTS
Amps
Amps
A2s
Volts
µA mA VAC C/W
C C
RATINGS AND CHARACTERISTIC CURVES MP50005 THRU MP5010
Average Forward Output Current, Amperes
Fig. 1 Derating Curve for Output Rectified Current
50
40
30
20
10 60Hz Resistive or Inductive Load
0 0 50 100
Case Temperature,oC
150
Fig. 3 Typical Instantaneous Forward Characteristics
100
10
1.0
0.1 Tj=25 C Pulse Width=300us 2% duty cycle
.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6
Instantaneous Forward Voltage, Volts
Instantaneous Reverse Current ,Amperes
Peak Forward Surge Current, Amperes
Fig. 2 Maximum Non-repetitive Peak Forward Surge Current
400
300
8.3ms Single half-sine-Wave
[JEDEC Method] 200
100
40 1 10
Number of Cycles at 60HZ
100
Fig. 4 Typical Reverse Characteristics at Tj=25oC
10 Tj=100 C
1.0
0.1
Tj=25 C
.01 0 20 40 60 80 100 120 140
Percent of Rated Peak Reverse Voltage, %
Instantaneous Forward Current, Amperes
.