Low Noise Amplifier
MGA-62563 Current-Adjustable, Low Noise Amplifier
Data Sheet
Description
Avago’s MGA-62563 is an economical, easy-to-us...
Description
MGA-62563 Current-Adjustable, Low Noise Amplifier
Data Sheet
Description
Avago’s MGA-62563 is an economical, easy-to-use GaAs MMIC amplifier that offers excellent linearity and low noise figure for applications from 0.1 to 3.5 GHz. Packaged in an miniature SOT-363 package, it requires half the board space of a SOT-143 package.
One external resistor is used to set the bias current taken by the device over a wide range. This allows the designer to use the same part in several circuit positions and tailor the linearity performance (and current consumption) to suit each position.
The output of the amplifier is matched to 50 (below 2:1 VSWR) across the entire bandwidth and only requires minimum input matching. The amplifier allows a wide dynamic range by offering a 0.9 dB NF coupled with a +32.9 dBm Output IP3. The circuit uses state-of-the-art E-pHEMT technology with proven reliability. On-chip bias circuitry allows operation from a single +3V power supply, while internal feedback ensures stability (K>1) over all frequencies.
Pin Connections and Package Marking
Features
Single +3V supply High linearity Low noise figure Miniature package Unconditionally stable
Specifications
at 500 MHz; 3V, 60 mA (Typ.) 0.9 dB noise figure 32.9 dBm OIP3 22 dB gain 17.8 dBm P1dB
Simplified Schematic
Ibias
Rbias
Vbias
4
Input match RFin
3
Feedback Bias
GND 1 GND 2 INPUT 3
62x
MGA-86563 Pkg
6
OUTPUT and Vd
5 GND
4 BIAS
1, 2, 5 GND
Note: Package marking provides or...
Similar Datasheet