DatasheetsPDF.com

MAX9979 Dataheets PDF



Part Number MAX9979
Manufacturers Maxim Integrated
Logo Maxim Integrated
Description Dual 1.1Gbps Pin Electronics
Datasheet MAX9979 DatasheetMAX9979 Datasheet (PDF)

MAX9979 19-4134; Rev 6; 8/11 EVAALVUAAILTAIOBNLEKIT Dual 1.1Gbps Pin Electronics with Integrated PMU and Level-Setting DACs General Description The MAX9979 fully integrated, high-performance, dualchannel pin electronics integrates multiple automatic test equipment (ATE) functions into a single IC, including driver/comparator/load (DCL), parametric measurement unit (PMU), and built-in (16-bit) level-setting digital-to-analog converters (DACs). The device is ideal for memory and SOC tester appli.

  MAX9979   MAX9979


Document
MAX9979 19-4134; Rev 6; 8/11 EVAALVUAAILTAIOBNLEKIT Dual 1.1Gbps Pin Electronics with Integrated PMU and Level-Setting DACs General Description The MAX9979 fully integrated, high-performance, dualchannel pin electronics integrates multiple automatic test equipment (ATE) functions into a single IC, including driver/comparator/load (DCL), parametric measurement unit (PMU), and built-in (16-bit) level-setting digital-to-analog converters (DACs). The device is ideal for memory and SOC tester applications. Each channel includes a fourlevel pin driver, window comparator, differential comparator, dynamic clamps, a versatile PMU, an active load, a high-voltage (VHH) programmable level, and 14 independent level-setting DACs. The MAX9979 features programmable cable-droop compensation for the driver output and for the comparator input, adjustable driver output resistance that allows optimal performance over typical data-path transmission-line variations, slew-rate adjustment, and a programmable high-voltage driver output. The MAX9979 driver features a wide 8V (-1.5V to +6.5V) high-speed operating voltage range and a VHH programmable range of up to +13V. Operation modes include high-impedance, active-termination (3rd-level drive) and VHH (4th-level drive) modes. The device is highly linear even at low voltage swings. The driver provides highspeed differential control inputs compatible with most high-speed logic families. The window comparators provide extremely low timing variation over changes in slew rate, pulse width, and overdrive voltage. In high-impedance mode, the MAX9979 features dynamic clamps that dampen high-speed device-under-test (DUT) waveforms. The 20mA active load facilitates fast contact testing when used in conjunction with the comparators, and functions as a pullup/pulldown for open-drain/collector DUT outputs. The PMU offers five current ranges from ±2μA to ±50mA and can force and measure current or voltage. An SPI™-compatible serial interface configures the MAX9979. The MAX9979 is available in a small footprint, 68-pin (10mm x 10mm x 1mm) TQFN-EP-IDP package with exposed pad on the top for easy heat removal. Power dissipation is 1.2W per channel (typ) over the full operating voltage range with the active load disabled. The MAX9979 operates over an internal die temperature range of +40°C to +100°C and provides a temperature monitor output. Applications Memory ATE Testers SOC ATE Testers Features o High Speed: 1.1Gbps at 1VP-P o Extremely Low Power Dissipation: 1.2W/Channel (Active Load Disabled) o Wide Voltage Range: -1.5V to +6.5V and Up to 13V VHH o Wide Voltage Swing Range: 50mVP-P to 13VP-P o Low-Leak Mode: 10nA max o Integrated Termination-on-the-Fly (3rd-Level Drive) o Integrated VHH High Voltage (4th-Level Drive) o Integrated Voltage Clamps o Integrated 20mA Active Load o Integrated Per-Pin PMU o Integrated Level-Setting CALDACs o Programmable Cable-Droop Compensation for Both Driver Output and Comparator Input o Programmable Driver Output Impedance o Four Slew-Rate Settings for Driver Output o Analog Measure Bus o Very Low Timing Dispersion o Minimal External Component Count o SPI-Compatible Serial Control Interface o 68-Pin Thermally Enhanced TQFN Package with Top-Side Heat Removal Ordering Information PART TEMP RANGE PIN-PACKAGE MAX9979KCTK+ 0°C to +70°C 68 TQFN-EP-IDP* +Denotes a lead(Pb)-free/RoHS-compliant package. *EP-IDP = Exposed pad, inverted die pad. Pin Configuration and Typical Operating Circuit appear at end of data sheet. SPI is a trademark of Motorola, Inc. ________________________________________________________________ Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. MAX9979 Dual 1.1Gbps Pin Electronics with Integrated PMU and Level-Setting DACs ABSOLUTE MAXIMUM RATINGS VCC to GND ............................................................-0.3V to +11V VEE to GND............................................................-5.5V to +0.3V VCC to VEE ...........................................................-0.3V to +16.5V VDD to DGND ........................................................-0.3V to +5.2V VHHP to GND ..........................................................-0.3V to +19V DGND to GND ....................................................................±0.3V TEMP to GND .................................................................0 to VCC MEAS_ to GND.................................(VEE - 0.3V) to (VCC + 0.3V) REF to GND ..............................................-0.3V to (2.6V + VDGS) Current into SCLK, DIN, CS, RST, LOAD .........................±30mA Current into LLEAKP_, HIZMEASP_, ENVHHP_, DUTHI_, DUTLO_ ...........................................................±30mA CTV_, BV_ to GND....................................................-0.3V to +5V DATA_, NDATA_, RCV_, PMU-F Continuous Current.......................


EKXJ451E MAX9979 HXB15H1G800CF


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)