ZIF/CIF Modulator
ZIF/CIF Modulator
GENERAL DESCRIPTION
This document describes specifications for the F1653NLGI I/Q Modulator implementin...
Description
ZIF/CIF Modulator
GENERAL DESCRIPTION
This document describes specifications for the F1653NLGI I/Q Modulator implementing ZeroDistortionTM technology for low power consumption with improved ACLR. This device interfaces directly to a high performance dual DAC.
COMPETITIVE ADVANTAGE
In typical multi-mode, multi-carrier basestation transmitters the modulator has limited linearity and high power consumption which penalizes the system ACLR and system Power consumptions budgets in a DigitalPre-Distortion environment. The IDTF1653 is designed to eliminate these penalties by embedding Zero-DistortionTM technology into the device such that very high IP3 and IP2 are achieved with minimal current draw.
Power consumption 45% IM3 Distortion 14 dB
PART# MATRIX
Part#
RF freq Range
F1650 600 – 2400
F1653 600 – 2900
IP2O
+60 dBm
+64 dBm
Power Cons.
587 mW
587 mW
IP3O
Noise
+36 dBm
+36 dBm
-158 dBm/Hz
-159 dBm/Hz
IDTF1653NLGI Datasheet
600MHz to 2900MHz
FEATURES
Power Gain = 3dB Direct 100Ω differential drive from Tx DAC < 590mW Power Consumption -159 dBm/Hz Output Noise -161 dBc/Hz Internal LO Path Noise IP2O = +64 dBm @ 2GHz IP3O = +36 dBm @ 2GHz Excellent native LO and image suppression 600 MHz input 1dB Bandwidth 600 MHz to 2900 MHz RF BW Fast Settling for TDD (< 200 nsec) 3.3V Single Power Supply LO port can be driven single ended or
differential 4mm x 4mm, 24-pin TQFN package
DEVICE BLOCK DIAGRAM
0 90
Zero-DistortionTTMM
Zero-DistortionTM M...
Similar Datasheet