NCP5901E

NCP5901E Product Preview VR12 Compatible Synchronous Buck MOSFET Drivers The NCP5901E is a high performance dual MOSFET gate driver optimized to drive the gates of both high−side and low−side power MOSFETs in a synchronous buck converter. It can drive up to 3 nF load with a 25 ns propagation delay and 20 ns transition time. Adaptive anti−cross−conduction and power saving operation circuit can provide a low switching loss and high efficiency solution for notebook and desktop systems. Bidirectional EN pin can provide a fault signal to controller when the gate driver fault detect under OVP, UVLO occur. Also, an under−voltage lockout function guarantees the outputs are low when supply voltage is low. Features Faster Rise and Fall Times Adaptive Anti−Cross−Conduction Circuit Pre OV function ZCD Detect Floating Top Driver Accommodates Boost Voltages of up to 35 V Output Disable Control Turns Off Both MOSFETs Under−voltage Lockout Power Saving Operation Under Light Load Conditions Direct Interface to NCP6151 and Other Compatible PWM Controllers Thermally Enhanced Package These are Pb−Free Devices Typical Applications Power Solutions for Desktop Systems http://onsemi.com 1 DFN8 MN SUFFIX CASE 506AA MARKING DIAGRAM 1 AJMG G AJ = Specific Device Code M = Date Code G = Pb−Free Device ORDERING INFORMATION Device Package Shipping† NCP5901EMNTBG DFN8 3000 / Tape & (Pb−Free) Reel †For information on tape and reel specifications, including part orientatio...