M231

M231 1 Form A 250V / 10Ω MOSFET Output Solid State Relay Description The M231 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay in a miniature 4-pin small outline package. With a high blocking voltage (250V) and low on-resistance, it is ideally suited to high voltage applications requiring higher load currents. The relay consists of an integrated circuit that drives two rugged source-to-source enhancement type DMOS transistors – optically coupled to a light emitting diode. The output MOS transistors are protected with free-wheeling diodes that can handle up to 1.5A of inrush current The M231 comes standard in a 4 pin SOP package. Applications  Reed Relay Replacement  Security Systems  Meter Reading Equipment  Data Acquisition  Battery Monitoring  Multiplexers Schematic Diagram Features  High Input-to-Output Isolation (1500V MIN)  Low Input Control Current (2.5mA TYP)  150mA Maximum Continuous Load Current  Low On Resistance (6 TYP)  Ultra Miniature 4SOP Package  Long Life / High Reliability  RoHS / Pb-Free / REACH Compliant Agency Approvals UL/C-UL: VDE: File # E201932 File # 40035191 (EN 60747-5-2) Absolute Maximum Ratings The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to absolute Maximum Ratings may cause permanent damage to the device and may...