JFET Input Operational Amplifiers
ON Semiconductort
JFET Input Operational Amplifiers
These low cost JFET input operational amplifiers combine two state–...
Description
ON Semiconductort
JFET Input Operational Amplifiers
These low cost JFET input operational amplifiers combine two state–of–the–art analog technologies on a single monolithic integrated circuit. Each internally compensated operational amplifier has well matched high voltage JFET input devices for low input offset voltage. The JFET technology provides wide bandwidths and fast slew rates with low input bias currents, input offset currents, and supply currents.
These devices are available in single, dual and quad operational amplifiers which are pin–compatible with the industry standard MC1741, MC1458, and the MC3403/LM324 bipolar devices.
Input Offset Voltage of 5.0 mV Max (LF347B) Low Input Bias Current: 50 pA Low Input Noise Voltage: 16 nV/ǸHz Wide Gain Bandwidth: 4.0 MHz High Slew Rate: 13V/µs Low Supply Current: 1.8 mA per Amplifier High Input Impedance: 1012 Ω High Common Mode and Supply Voltage Rejection Ratios: 100 dB
MAXIMUM RATINGS Rating
Supply Voltage
Differential Input Voltage Input Voltage Range (Note 1) Output Short Circuit Duration (Note 2) Power Dissipation at TA = +25°C
Derate above TA =+25°C Operating Ambient Temperature Range Operating Junction Temperature Range Storage Temperature Range
Symbol
VCC VEE VID VIDR tSC PD 1/θJA TA TJ Tstg
Value
Unit
+18 V –18
±30 V
±15 V
Continuous
900 mW 10 mW/°C
0 to +70
°C
115 °C
– 65 to +150
°C
NOTES: 1. Unless otherwise specified, the absolute maximum negative input voltage is limited to the neg...
Similar Datasheet