eMCP Specification
Embedded MCP specification
P3204M2S5X2
Datasheet Preliminary Ver 1.0
Apollo Memory System Company
_...
eMCP Specification
Embedded MCP specification
P3204M2S5X2
Datasheet Preliminary Ver 1.0
Apollo Memory System Company
____________________________________________________________________________________________________________________
© 2014 Apollo memory system company
1
CONFIDENTIAL
eMCP Specification
- Compatible Approved Vendor List –
Chipset AVL
Chipset Model
eMCP PN
Mediatek
MT6572
04EMCP04-EL2AS100
Note 1: compatible AVL updated by 2014,Q4
-Device Summary-:
Product Part number
Table 1 – Device Summary
NAND
DRAM
CH & CS For DRAM
P3204M2S5X2
4GB 4Gb 1CH, 1CS
-System Performance-
Operating voltage
VCC=3.3V, VCCQ=1.8V/3.3V VDD1 = 1.8V VDD2, VDDQ = 1.2V
Table 2 – eMMC™ Device Performance
Typical value
Read Sequential (MB/s)
Write Sequential (MB/s)
P3204M2S5X2
100
12
Note 1: Values given for an 8-bit bus width, running HS200 mode from proprietary tool, VCC=3.3V, VCCQ=1.8V. Note 2: Performance numbers might be subject to changes without notice.
____________________________________________________________________________________________________________________
© 2014 Apollo memory system company
2
CONFIDENTIAL
eMCP Specification
< Embedded MMC™ - NAND>
Packaged NAND flash memory with eMMC™ 5.0 interface Compliant with eMMC™ Specification Ver.4.4, 4.41,4.5&5.0 Supports three different data bus widths : 1 bit(default), 4 bits, 8 bits
- Data transfer rate: up to 52Mbyte/s (using 8 parallel data lines at 52 MHz)...