IL9010N

IL9010N, IL9010D IC of collector electric motor controller Microcircuit is designed for stabilization of collector electric motor rotation speed. IC`s supply power can be obtained from alternating current line with voltage 110 V or 220 V, frequency of 50 Hz or 60 Hz through half-wave rectifier and ballast resistor. Functions: Microcircuit enables stabilization of electric motor speed , optimal triac firing (2nd and 3rd quadrants ), repetitive trigger pulses when triac current is interrapted by motor collector, changing of triac current at work with induced load, soft start , power failure detection and general circuit reset . Features: Circuit power supply obtained from AC net Can be used in with AC networks 220 V / 50 Hz and 110 V / 60 Hz Low count and cost of external components Optimal triac firing (2nd and 3nd quadrants) Repetitive control pulses when current interrupted by electric motor collector Tracing triac current while operating for inductive load Possibility of Soft start mode setting Power error detection and general reset Embedded voltage comparator for expansion of circuit control functions Low bias input current at comparator`s inputs: 100nA Low shift current at comparator`s inputs ±10nA Damper of electrostatic dischargeat comparator inputs increase circuit reliability Low power consumption TA=от 0oC до +70oC Symbols for pins in package Output Vcc Vee Gate Trigger Pulse Ramp Generator Current Sense Voltage Sense 1 2 3 4 5 6 7 14 - Input 13 + Input 12 Soft...