Boot Sector Flash Memory
A29160A Series
2M X 8 Bit / 1M X 16 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory
Document Title 2M X 8 Bit / 1M X ...
Description
A29160A Series
2M X 8 Bit / 1M X 16 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory
Document Title 2M X 8 Bit / 1M X 16 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory
Revision History
Rev. No.
0.0 1.0 1.1
1.2
History
Initial issue Update ICC3, ICC4, Absolute Maximum Rating, Program/Erase time and Data Retention Page 6 “Writing Commands/Command Sequences” section : Change The “Word/Byte Program Command Sequence” section has details on programming data to the device using both standard and Unlock Bypass command sequence. Into The “Word/Byte Program Command Sequence” and “Unlock Bypass Command Sequence” has detail descriptions on programming data to the device using both standard and Unlock Bypass command sequence. Page 18: Delete Note 8 and adjust the Notes in the Table 9
Issue Date
May 27, 2013 May 8, 2014 August 5, 2014
August 11, 2014
Remark
Preliminary Final
(August, 2014, Version 1.2)
AMIC Technology, Corp.
A29160A Series
2M X 8 Bit / 1M X 16 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory
Features
Single power supply operation - Full voltage range: 4.5 to 5.5 volt for read and write operations
Access time: - 55ns (max.)
Current: - 20mA typical active read current - 30mA typical program/erase current
- 6uA typical CMOS standby ( WP = VCC or Float) Flexible sector architecture
- 16 Kbyte/ 8 KbyteX2/ 32 Kbyte/ 64 KbyteX31 sectors - 8 Kword/ 4 KwordX2/ 16 Kword/ 32 KwordX31 sectors - Any combination of sectors can be erased - Supports full chip erase -...
Similar Datasheet