DatasheetsPDF.com

D4015L Dataheets PDF



Part Number D4015L
Manufacturers Littelfuse
Logo Littelfuse
Description Rectifier
Datasheet D4015L DatasheetD4015L Datasheet (PDF)

Teccor® brand Thyristors 15 / 20 / 25 Amp Rectifiers Dxx15L & Dxx20L & Dxx25L Series RoHS Agency Approval Agency Agency File Number L Package : E71639 Schematic Symbol A K Additional Information Description Silicon rectifiers that are excellent for DC phase control applications with motor loads. Isolated mounting tab allows for use in circuits with common anode or common cathode connections. Features & Benefits • RoHS Compliant • Glass – passivated junctions • Voltage capability up to.

  D4015L   D4015L


Document
Teccor® brand Thyristors 15 / 20 / 25 Amp Rectifiers Dxx15L & Dxx20L & Dxx25L Series RoHS Agency Approval Agency Agency File Number L Package : E71639 Schematic Symbol A K Additional Information Description Silicon rectifiers that are excellent for DC phase control applications with motor loads. Isolated mounting tab allows for use in circuits with common anode or common cathode connections. Features & Benefits • RoHS Compliant • Glass – passivated junctions • Voltage capability up to 1000 V • Surge capability up to 350 A Applications Typical applications are AC to DC solid-state switches for industrial power tools, exercise equipment, white goods, and commercial appliances. Internally constructed isolated package is offered for ease of heat sinking with highest isolation voltage. Main Features Symbol IT(RMS) VRRM Value 15 / 20 / 25 400 to 1000 Unit A V Datasheet Resources Samples Absolute Maximum Ratings Symbol IF(RMS) IF(AV) Parameter RMS forward current Average forward current IFSM Peak non-repetitive surge current I2t Tstg TJ Note: xx = voltage I2t Value for fusing Storage temperature range Operating junction temperature range Test Conditions Dxx2D0xLx/D15xLx:2T5CL=: T9C0=°C80°C single half cycle; f = 50Hz; TJ (initial) = 25°C single half cycle; f = 60Hz; TJ (initial) = 25°C tp = 8.3 ms Dxx15L 15 9.5 188 225 210 Value Dxx20L 20 12.7 255 300 374 -40 to 150 -40 to 125 Dxx25L 25 15.9 300 350 508 Unit A A A A2s °C °C © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 Teccor® brand Thyristors 15 / 20 / 25 Amp Rectifiers Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol trr Parameter Reverse-recovery Time Test Conditions IF=0.9A, IR=1.5A Value Unit TYP. 4 μs Static Characteristics Symbol VFM IRM Test Conditions 15A Device IT = 30A; tp = 380μs 20A Device IT = 40A; tp = 380μs 25A Device IT = 50A; tp = 380μs TJ = 25°C VRRM TJ = 100°C TJ = 125°C 400-600V 800-1000V 400-800V 1000V 400-800V MAX. MAX. Value 1.6 10 20 500 3000 1000 Unit V μA Instantaneous Forward Current (iF) – Amps Average Forward Power Dissipation [PF(AV)] - (Watts) Thermal Resistances Symbol Parameter Rθ(J-C) Note: xx = voltage Junction to case (AC) Figure 1: On-State Current vs. On-State Voltage (Typical) 160 140 TJ = 25°C 120 Dxx25L Dxx20L 100 80 60 Dxx15L 40 20 0 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Instantaneous Forward Voltage (vF) – Volts Dxx15L Dxx20L Dxx25L Value 2.60 2.55 2.50 Unit °C/W Figure 2: P ower Dissipation vs. Average Forward OnState Current (Typical) 20 Dxx25L Dxx20L 16 Dxx15L 12 8 4 Single pulse rectification 60Hz sine wave 0 0 2 4 6 8 10 12 14 16 Average Forward Current [IF(AV)] - Amps © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 Teccor® brand Thyristors 15 / 20 / 25 Amp Rectifiers Figure 3: Maximum Allowable Case Temperature vs. Average On-State Current Maximum Allowable Case Temperature (TC) - °C 130 125 120 115 110 105 100 95 Dxx15L 90 Dxx25L 85 80 75 70 0 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° Dxx20L 2 4 6 8 10 12 14 Average Forward Current [IF(AVE)] - Amps 16 Note: xx = voltage 18 Soldering Parameters Reflow Condition Pb – Free assembly - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (min to max) (ts) Average ramp up rate (LiquidusTemp) (TL) to peak TS(max) to TL - Ramp-up Rate Reflow -Temperature (TL) (Liquidus) - Temperature (tL) Peak Temperature (TP) Time within 5°C of actual peak Temperature (tp) Ramp-down Rate Time 25°C to peakTemperature (TP) Do not exceed 150°C 200°C 60 – 180 secs 5°C/second max 5°C/second max 217°C 60 – 150 seconds 260+0/-5 °C 20 – 40 seconds 5°C/second max 8 minutes Max. 280°C Figure 4: S urge Peak On-State Current vs. Number of Cycles 1000 Dxx25L Dxx20L 100 Dxx15L 10 Peak Surge (Non-repetitive) Forward Current (IFSM) – Amps 1 1 10 100 Surge Current Duration -- Full Cycles Supply Frequency: 60Hz Sinusoidal Load: Resistive RMS Forward Current : [IT(RMS)]: Maximum Rated Value at Specific Case Temperature 1000 Temperature TP TL TS(max) TS(min) 25 Ramp-up Preheat tS time to peak temperature tP tL Ramp-down Time © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 Teccor® brand Thyristors 15 / 20 / 25 Amp Rectifiers Physical Specifications Terminal Finish Body Material Lead Material 100% Matte Tin Plated UL recognized epoxy meeting flammability classification 94V-0 Copper Alloy Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the rectifier. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rat.


D6025L D4015L D4025L


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)