SA100A

SA5.0(C)A - SA170(C)A SA5.0(C)A - SA170(C)A Features Glass passivated junction. 500W Peak Pulse Power capability on 10/1000 µs waveform. Excellent clamping capability. Low incremental surge resistance. Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. Typical IR less than 1.0 µA above 10V. DO-15 COLOR BAND DENOTES CATHODE EXCEPT BIPOLAR DEVICES FOR BIPOLAR APPLICATIONS - Bidirectional types use CA suffix. - Electrical Characteristics apply in both directions. 1.0 min (25.4) Dimensions in inches (mm) 0.300 (7.62) 0.230 (5.84) 0.140 (3.56) 0.104 (2.64) 0.034 (0.86) 0.028 (0.71) 500 Watt Transient Voltage Suppressors Absolute Maximum Ratings* TA = 25°C unless otherwise noted Symbol Parameter Value PPPM IPPM PM(AV) if(surge) Tstg TJ Peak Pulse Power Dissipation on 10/1000 µs waveform Peak Pulse Current on 10/1000 µs waveform Steady State Power Dissipation .375 " lead length @ TA = 75°C Peak Forward Surge Current superimposed on rated load (JEDEC method) Storage Temperature Range (Note 1) Operating Junction Temperature minimum 500 see table 1.0 70 -65 to +175 -65 to +175 *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum. Units W A W A °C °C 1998 Fairchild Semiconductor Corporation SA5.0(C)A - SA170(C)A, Rev. ...