DatasheetsPDF.com

MBRB1045CT Dataheets PDF



Part Number MBRB1045CT
Manufacturers CITC
Logo CITC
Description 10A Surface Mount High Power Schottky Barrier Rectifiers
Datasheet MBRB1045CT DatasheetMBRB1045CT Datasheet (PDF)

MBRB1040CT THRU MBRB10200CT 10A Surface Mount High Power Schottky Barrier Rectifiers ■ Features • Electrostatic discharge (ESD) test under IEC6100-4-2 standard >16ΚV(ΜΒRΒ1040CT~ΜΒRΒ1065CT). standard >10ΚV(ΜΒRΒ10100CT~ΜΒRΒ10200CT). • Low power loss, high efficiency. • High current capability, low forward voltage drop. • High surge capability. • Guardring for overvoltage protection. • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. • Suffix "G" indicates Halog.

  MBRB1045CT   MBRB1045CT


Document
MBRB1040CT THRU MBRB10200CT 10A Surface Mount High Power Schottky Barrier Rectifiers ■ Features • Electrostatic discharge (ESD) test under IEC6100-4-2 standard >16ΚV(ΜΒRΒ1040CT~ΜΒRΒ1065CT). standard >10ΚV(ΜΒRΒ10100CT~ΜΒRΒ10200CT). • Low power loss, high efficiency. • High current capability, low forward voltage drop. • High surge capability. • Guardring for overvoltage protection. • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. • Suffix "G" indicates Halogen-free part, ex.MBRB1040CTG. • Lead-free parts meet environmental standards of MIL-STD-19500 /228 ■ Mechanical data • Epoxy : UL94-V0 rated flame retardant. • Case : Molded plastic, TO-263 / D2PAK • Terminals : Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity: Indicated by cathode band. • Mounting Position : Any. • Weight : Approximated 1.70 gram. ■ Outline D2PAK(TO-263) 0.402(10.20) 0.046(1.20) 0.386(9.80) 0.032(0.80) 2 0.370(9.40) Marking code 0.354(9.00) 13 0.192(4.8) 0.176(4.4) 0.063(1.60) 0.055(1.40) 0.205(5.20) 0.189(4.80) 0.185(4.70) 0.169(4.30) 0.055(1.40) 0.047(1.20) 0.012(0.30) 0.004(0.10) 0.108(2.70) 0.092(2.30) 0.024(0.60) 0.016(0.40) PIN 1 PIN 3 PIN 2 Dimensions in inches and (millimeters) ■ Maximum ratings and electrical characteristics Rating at 25OC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter Forward rectified current Forward surge current Reverse current Diode junction capacitance Thermal resistance Storage temperature Conditions See Fig.1 8.3ms single half sine-wave superimposed on rate load (JEDEC method) VR = VRRM TA = 25OC VR = VRRM TA = 125OC f=1MHz and applied 4V DC reverse voltage Junction to ambient Symbol IO IFSM IR CJ RθJA TSTG MIN. -55 TYP. 150 30 MAX. 10 125 0.1 10 +175 UNIT A A mA pF OC/W OC Symbol Marking code Max. repetitive peak reverse voltage VRRM (V) MBRB1040CT MBRB1040CT 40 MBRB1045CT MBRB1045CT 45 MBRB1060CT MBRB1060CT 60 MBRB1065CT MBRB1065CT 65 MBRB10100CT MBRB10100CT 100 MBRB10150CT MBRB10150CT 150 MBRB10200CT MBRB10200CT 200 Max. RMS voltage VRMS (V) 28 31.5 42 45.5 70 105 140 Max. DC blocking voltage VR (V) 40 45 60 65 100 150 200 Max. forward voltage @5A, TA = 25OC VF (V) 0.70 0.79 0.81 0.87 0.90 Max. forward voltage @5A, TA = 125OC VF (V) Operating temperature TJ (OC) 0.57 0.70 -50 ~ +150 0.71 0.77 0.80 -50 ~ +175 Document ID : DS-12K63 1 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C MBRB1040CT THRU MBRB10200CT 10A Surface Mount High Power Schottky Barrier Rectifiers ■ Rating and characteristic curves Average Forward Current (A) Instantaneous Forward Current (A) Fig.1 - Forward Current Derating Curve 12 RESISTIVE OR INDUCTIVE LOAD 10 8.0 MBRB1040CT~MBRB10100CT 6.0 4.0 MBRB10150CT~MBRB10200CT 2.0 single phase half wave 60Hz resistive or inductive load 0 25 50 75 100 125 150 175 Lead Temperature ( OC) Fig. 3.1 - Typical Instantaneous Forward Characteristics 50 MBRB1040CT 10 TJ=125OC 1 MBRB1060CT 0.1 0.01 TJ=25OC 0.2 0.4 0.6 0.8 1.0 Instantaneous Forward Voltage (Volts) 1.2 Fig. 3.3 - Typical Instantaneous Forward Characteristics 100 MBRB10150CT MBRB10200CT 10 TJ=125OC TJ=25OC 1 0 0.2 0.4 0.6 0.8 1.0 Instantaneous Forward Voltage (Volts) 1.2 Instantaneous Reverse Current (mA) Peak Forward Surge Current (A) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 150 125 100 75 50 25 0 1 10 Number of Cycles at 60 Hz 100 Fig. 3.2 - Typical Instantaneous Forward Characteristics 50 MBRB10100CT 10 TJ=125OC Instantaneous Forward Current (A) 1.0 0.5 TJ=25OC 0 0.2 0.4 0.6 0.8 1.0 Instantaneous Forward Voltage (Volts) Fig. 4 - Typical Reverse Characteristics 100 10 TJ=150OC 1 TJ=125OC 0.1 0.01 TJ=75OC 0.001 0.0001 0 TJ=25OC 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage ( %) Document ID : DS-12K63 2 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C Instantaneous Forward Current (A) MBRB1040CT THRU MBRB10200CT 10A Surface Mount High Power Schottky Barrier Rectifiers ■ D2PAK(TO-263) foot print A B C G F D E ABCDE FG 0.425 (10.80) 0.665 (16.90) 0.374 (9.50) 0.071 (1.80) 0.098 (2.50) 0.138 (3.50) 0.449 (11.40) Dimensions in inches and (millimeters) ■ CITC reserves the right to make changes to this document and its products and specifications at any time without notice. ■ Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. ■ CITC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does CITC assume any liability for application assistance or customer product design. ■ CITC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. ■ No license is granted by implication or otherwise under any intellectua.


MBRB1040CT MBRB1045CT MBRB1060CT


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)