Document
MBRF3020CT THRU MBRF30200CT
30 AMPERS ISOLATION SCHOTTKY BARRIER RECTIFIER
Reverse Voltage - 20 and 200 Volts Forward Current - 30.0 Ampere
ITO-220AB
FEATURES
0.406(10.3) 0.381(9.7)
Ø 0.134(3.4) Ø 0.118(3.0)
0.130(3.3) 0.114(2.9)
0.248(6.3)
0.272(6.9)
0.606(15.4) 0.583(14.8) 0.161(4.1)MAX
0.112(2.85) 0.100(2.55)
Pin 1
0.543(13.8) 0.512(13.0)
0.055(1.4) 0.039(1.0)
0.028(0.7) 0.019(0.5)
0.1(2.54) TYP.
0.027(0.67) 0.022(0.57)
Dimensions in inches and (millimeters)
0.189(4.8) 0.165(4.2)
0.114(2.9) 0.098(2.5)
◆ Flame Retardant Epoxy Molding Compound. ◆ Metal silicon junction, majority carrier conduction. ◆ Low power loss, High efficiency, High current capability. ◆ Guardring for overvoltage protection. ◆ Electrically Isolated. No Isolation Hardware Required. ◆ In compliance with EU Rohs 2002/95/EC directives. ◆ For use low voltage, high frequency inverters froo wheeling, and
polarlity protection application. ◆ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0.
MECHANICAL DATA
Case: ITO-220AB, Full molded plastic package. Terminals: Solderable per MIL-STD-750,Method 2026 Standard Packaging : Tube. Polarity: As marked. Mounting Position: Any. Weight: 0.0655 ounces, 1.859 grams.
AC 1 AC 3
2
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specif ied. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
PARAMETER Maximum repetitive peak reverse voltage
MBRF MBRF MBRF MBRF MBRF MBRF MBRF MBRF MBRF
SYMBOLS
3020CT 3040CT 3045CT 3050CT 3060CT 3080CT 30100CT 30150CT 30200CT
UNITS
VRRM 20 40 45 50 60 80 100 150 200 Volts
Maximum RMS voltage
VRMS 14 28 31.5 35 42 56 70 105 140 Volts
Minimum DC Breakdown Voltage
VDC 20 40 45 50 60 80 100 150 200 Volts
Average Rectified current
IF(AV)
Non-repetitive Peak Forward Surge Current at 8.3ms half sine-wave superimposed on rated load (JEDEC mathod)
IFSM
Maximum Forward Voltage
at IF=30A VF
Maximum DC Reverse Current at Rated DC Blocking Voltage
TJ= 25°C IR
Typical Thermal Resistance
Rθ JC
0.70
30 275 0.75 0.05 1.5
0.80
Amp Amps
0.9 Volts
mA °C/W
Operating Junction and Storage Temperature Range
TJ, TSTG -50 ~ +150
-65 ~ +175
°C
Note: Both bonding and chip structure are available.
GOOD ELECTRONIC CO., LTD
AVERAGE FORWARD RECTIFIED CURRENT (A) .
MBRF3020CT THRU MBRF30200CT
RATINGS AND CHARACTERISTIC CURVES
FIG. 1- FORWARD CURRENT DERATING CURVE 30
20-40V 25 45-200V
20
15
10 RESISTIVE OR
5 INDUCTIVE LOAD
0 0 20 40 60 80 100 120 140 160 180 LEAD TEMPERATURE (°C)
PEAK FORWARD SURGE CURRENT (A) .
300 275 250 225 200 175 150 125 100
75 50 25
0 1
FIG. 2-TYPICAL FORWARD SURGE CHARACTERISTICS
2
5 10 20
50 100
No. OF CYCLE at 60Hz
FIG. 3-TYPICAL REVERSE CHARACTERISTICS
10
TC=125°C 1
0.1
0.01
0.001 0
TC=75°C TC=25°C
20 40 60 80
PERCENT OF INSTANTANEOUS REVERSE VOLTAGE (%)
100
INTSTANTANEOUS FORWARD CURRENT (A)
FIG. 4-TYPICAL INSTANTANEOUS FORWARD .