Document
MBRF3040CT THRU MBRF30200CT
30A High Power Schottky Barrier Rectifiers
■ Features
■ Outline
• Low power loss, high efficiency. • High current capability, low forward voltage drop. • High surge capability. • Guardring for overvoltage protection. • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. • Suffix "G" indicates Halogen-free part, ex.MBRF3040CTG. • Lead-free parts meet environmental standards of
MIL-STD-19500 /228
ITO-220AB
0.408(10.36) 0.382(9.70)
0.189(4.80)
0.165(4.20) 0.130(3.30)
0.098(2.50)
0.138(3.50) MAX
Marking code
123
0.339(8.60) 0.315(8.00)
0.600(15.5) 0.580(14.5)
■ Mechanical data
• Epoxy : UL94-V0 rated flame retardant. • Case : JEDEC ITO-220AB molded plastic body over
passivated chip. • Lead : Axial leads, solderable per MIL-STD-202,
Method 208 guranteed. • Polarity: Color band denotes cathode end. • Mounting Position : Any. • Weight : Approximated 2.25 gram.
0.055(1.4) 0.039(1.0)
0.067(1.7) 0.039(1.0)
0.035(0.90) 0.012(0.30)
0.171(4.35)MAX
0.114(2.90) 0.098(2.50)
0.512(13.0) MIN
0.110(2.80) 0.091(2.30)
0.031(0.80)MAX
PIN 1 PIN 3
PIN 2
Dimensions in inches and (millimeters)
■ Maximum ratings and electrical characteristics
Rating at 25OC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Parameter Forward rectified current Forward surge current
Reverse current
Diode junction capacitance Thermal resistance Storage temperature
Conditions
See Fig.1 8.3ms single half sine-wave superimposed on rate load (JEDEC method) VR = VRRM TA = 25OC VR = VRRM TA = 125OC f=1MHz and applied 4V DC reverse voltage
Junction to ambient
Symbol IO IFSM
IR
CJ RθJA TSTG
MIN. -55
TYP.
150 30
MAX. 30 200 0.1 10
+175
UNIT A A
mA
pF OC/W
OC
Symbol
Marking code
Max. repetitive peak reverse voltage
VRRM (V)
MBRF3040CT MBRF3040CT
40
MBRF3045CT MBRF3045CT
45
MBRF3060CT MBRF3060CT
60
MBRF3065CT MBRF3065CT
65
MBRF30100CT MBRF30100CT
100
MBRF30150CT MBRF30150CT
150
MBRF30200CT MBRF30200CT
200
Max. RMS voltage
VRMS (V)
28 31.5 42 45.5 70 105 140
Max. DC blocking voltage
VR (V)
40
45
Max. forward voltage @15A, TA = 25OC
VF (V)
0.70
Max. forward voltage @15A, TA = 125OC
VF (V)
Operating
temperature TJ (OC)
0.57
60 -55 ~ +150
0.79
0.70
65
100 0.81 0.71
150 0.87 0.77 -55 ~ +175
200 0.90 0.80
Document ID : DS-11K60
1 Issued Date : 2010/05/05
Revised Date : 2012/05/31 Revision : C2
MBRF3040CT THRU MBRF30200CT
30A High Power Schottky Barrier Rectifiers
Average Forward Current (A)
■ Rating and characteristic curves
Fig.1 - Forward Current Derating Curve
30.0 25.0 20.0 15.0 MBRF3040CT~MBRF30100CT 10.0 MBRF30150CT~MBRF30200CT
5.0 single phase half wave 60Hz resistive or inductive load
0 25 50 75 100 125 150 175 Lead Temperature ( OC)
Fig. 3A - Instantaneous Forward Characteristics
100 MBRF3040CT
TJ=125°C
10 TJ=25°C
Peak Forward Surge Current (A)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
240
200
160
120 80 40
0 1 10 Number of Cycles at 60 Hz
100
Fig. 3B - Instantaneous Forward Characteristics
100
MBRF3060CT ~ MBRF30100CT
TJ=125°C
10 TJ=25°C
Instantaneous Forward Current (A)
Instantaneous Forward Current (A)
Instantaneous Forward Current (A)
1 0 0.2 0.4 0.6 0.8 Instantaneous Forward Voltage (Volts)
1.0
Fig. 3C - Instantaneous Forward Characteristics
100 MBRF30150CT ~ MBRF30200CT
50
20 TJ=125° C
10
5
2 TJ=25°C
1
0
0.2 0.4 0.6
0.8
Instantaneous Forward Voltage (Volts)
1.0
Instantaneous Reverse Current (mA)
1 0 0.2 0.4 0.6 0.8 Instantaneous Forward Voltage (Volts)
1.0
Fig. 4 - Reverse Characteristics
100
TJ=100OC 10
TJ=75OC 1
0.1 0.01
TJ=25OC
0.0010
20 40 60
80 10 0 12 0
Percent of Rated Peak Reverse Voltage ( %)
140
Document ID : DS-11K60
2 Issued Date : 2010/05/05
Revised Date : 2012/05/31 Revision : C2
MBRF3040CT THRU MBRF30200CT
30A High Power Schottky Barrier Rectifiers
■ CITC reserves the right to make changes to this document and its products and specifications at any time without notice.
■ Customers should obtain and confirm the latest product information and specifications before final design, purchase or use.
■ CITC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does CITC assume any liability for application assistance or customer product design.
■ CITC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application.
■ No license is granted by implication or otherwise under any intellectual property rights of CITC. ■ CITC products are not authorized for use as critical components in life support devices or systems
without express written approval of CITC.
http://www.citcorp.com.tw/
Tel:886-3-5600628
Fax:886-3-5600636
Add:Rm. 3, 2F., No.32, Taiyuan St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.)
3
Document ID : DS-11K60 Issued Date : 2010/05/.