800kHz Synchronous Step-up Converter
M3TEK
Preliminary Datasheet
MT5033
800kHz Synchronous Step-up Converter with 6A Switches
DESCRIPTION
The MT5033 devi...
Description
M3TEK
Preliminary Datasheet
MT5033
800kHz Synchronous Step-up Converter with 6A Switches
DESCRIPTION
The MT5033 devices provide a power supply solution for products powered by either a one-cell Li-Ion or Li-polymer battery. The converter generates a stable output voltage that is either adjusted by an external resistor divider or fixed internally on the chip. It provides high efficient power conversion and is capable of delivering output currents up to 2.5A at 5V with a supply voltage down to 3V. The maximum peak current in the step-up switch is limited to a value of 6A. The MT5033 operates at 800kHz switching frequency and enters pulse-skip-mode (PSM) operation at light load currents to maintain high efficiency over the entire load current range. During shutdown, the load is completely disconnected from the battery.
FEATURES
Synchronous Step-up Converter with 2.5A Output Current From 3V Input Wide VIN Range From 2.9V to 5.5V Input Under-voltage Lockout Protection Fixed and Adjustable Output Voltage Built-in Output Over-voltage Protection Light-Load Pulse Skip Mode Load Disconnect During Shutdown Output Short Circuit Protection Thermal Shutdown Protection Available in a SOP8_EP Packages
APPLICATIONS
Power Bank USB Charging Port (5V) DC/DC Micro Modules
3V to 5V Input
L1 1.5uH
C1 10uF
SW VIN EN
GND
MT5033
VOUT
R3 FB
R4
C2 C3 10uF 10uF
5V output up to 2.5A
PGND
Figure 1. MT5033 Typical Application Circuit
Rev. 0.1 www.m3tekic.com
M3tekic Confidential
1
M3TEK
...
Similar Datasheet